Recommended Posts

Posted

I was visiting my sawyer buddy and he gave me a block of cherry, it is a 13" cube. Has some hard checking about 2" in from the outside , got it coated with wax now to try to stop it from getting worse. Looking for suggestions or ideas on what to do with it.

Posted

Re-saw it and make two or three large bowls.

You could hollow it and make it into a massive vase.

As for the checking, that should reduce once you have knocked the corners off. If not, resharpen, and try again. It also could relate to the grain direction if you mounted the long grain vertically.

Posted

Weigh it on a fairly accurate scale. Record the date and weight, when it quits changing then you can think about using it. Once you start roughing it out do the same thing, weigh it and wait for it to stabilize.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.