Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

HVLP Questions

Featured Replies

I've recently built a tv cabinet and I am now to the point where I need to finish it. Since this is a large piece of furniture I figured it lends itself nicely to spray finishing.  I do not own a HVLP spray gun, but I have read a lot of good reviews about one from Harbor Freight, which is right down the street from my house.

 

Anyway, I want to spray the stain on this thing.  Do I need to thin it first?  The stain itself seems fairly thin already, so this may not be an issue.   Can I use the gun to spray poly over the stain?  Do I need to thin it with something?  

 

I really have no idea what I am doing, so any advice is appreciated.

When spraing a stain...I typically use the gun to get the stain of fast. Then wipe it back. So gun in one hand and a pad in the other to even it out. The stain should be ok, if you have to thin...just maybe a splash of thinner. If you have to open the fluid needle more.

 

As to the HF spray gun. If it's the purple compressed air gun. I say dont get it. For slopping stain...you'll be ok...but its a cheap gun through and through. It may leak on you around the cup or past the needel an nozzle. I had a coupon bought one, returned it for another and that one did the same thing...leaked all over.

 

If you want  to spray...get a decent gun for under 100.00 My suggestion would be a good LVLP. Find them on Craigs List or if you have any auto body stores they typically have a few used guns that were Demo's but ya may spend a little more $$$$

 

-Ace-

  • Author

Thanks.  Kind of discouraging about the HF, though I'm not surprised.  I read a few good things about it on Lumber Jocks and thought I'd grab one since it is cheap.  Oh well.  A friend of mine has some automotive spray guns, so I might see what he has to say. 

 

 

Edit: why LVLP instead of HVLP?  I have a decent sized compressor, so that isnt an issue for me.

I have one of the purple HVLP guns from HF and it doesn't leak at all, it sprayed with no problems. Don't really use it a whole lot anymore since I got an Earlex.

Thanks.  Kind of discouraging about the HF, though I'm not surprised.  I read a few good things about it on Lumber Jocks and thought I'd grab one since it is cheap.  Oh well.  A friend of mine has some automotive spray guns, so I might see what he has to say. 

 

 

Edit: why LVLP instead of HVLP?  I have a decent sized compressor, so that isnt an issue for me.

 

I have a Sata LVLP has less over-spray and thus reduces bounce back. I think they atomize water-based finishes a little better.

 

-Ace-

 

Hey man go for the purple gun and give it a try...not trying to talk ya out of it...by me with the coupon think I saw them for $12.00. :)

As another option, the Earlex (5000 or 5500) HVLP has worked very well for me, for several years and countless gallons of finish (Shellac and General Finishes waterbourne).  Total cost, including turbine is ~$300.

  • Author

Can you guys give any tips for using one?

I have:

4 apollo 7500 turbine guns

1 Awata hvlp / comp air

1 Sata lvlp / comp air

3 CA air tools lvlps / comp air

2 snap on blue point garage sale specials

3 kobalt hvlp lowes specials

The apollo are probably the best quality turbine guns but they are in the sack with kremlin. The best value and spray for the money are the CA air tools lvlp. These come from Home Depot and sears not as cheap as harbor freight but close. The awata is just way over priced as was the sata unless you can get them at a body shop garage sale. Great guns but to expensive for average woodworking I paid next to nothing at a going out of business sale. The snapon are just rebranded overprice imports. The kobalts are pretty much junk but good for spraying dyes.

Don

  • Author

As to tips on how to spray?

 

-Ace-

 

Sure.  Anything really.  I've never used an HVLP gun for finishing.  There has to be some do's, and more importantly, some do nots.

Oops... I have the Iwata LPH400 (LVLP) sorry not Sata....sheesh getting old!

 

The only thing is to practice. Novice sprayers will spray too thin because of fearing runs. You want to achieve a good wet coat, wet enough before the finish runs.

 

There is a ton of info out on the Internet on spraying. Take some time and read up. Also it helps if you can finish unassembled pieces. Take an empty spray gun and rehearser all your moves so there will be no surprises. Even where your going to moving freshly sprayed pieces. 

 

Spraying is learned...its going to be a tough go in the beginning and you will be smoothing a lot of finish with sandpaper, till you achieve good spray technique.

 

You will need a good air-line dryer to keep oil and moisture from contaminating the finish.

 

-Ace- 

I want to say that I have used the purple gravity fed HVLP gun from HF for a trim job. I am not saying it is the greatest gun but it will get the job done. You need to just like every HF try it and if there is anything wrong take it back for a new one. Remember always with HF you are the QC department :)

 

Edit: I sprayed about 6 gallons or so of DEFT water based finish

  • Author

Thank you everyone for the replies.  I think I am going to buy an HVLP gun, but not for this project.  I'll finish it with a brush, and buy a gun and practice with it for a while.  Maybe during the construction phase of my next project, when I'm waiting for glue to dry, or avoiding cleaning. 

I'll vote for buying an Earlex 5500.  They go on sale all the time for under $300 and usually have another needle.  I have the older Earlex 5000 and it's been great to work with.  

 

Spraying requires practice, so take some scraps out and start spraying.  One thing I'll add for technique, make sure to spray beyond the work piece.  Consistent back and forth and don't stop at the edge of the wood, go past.  I think that is also a rookie mistake.

 

chris

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.