Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What did you get right the first time?

Featured Replies

I was in my shop last night around midnight just grinning from ear to ear.

 

I just completed a flip-up planner cart that storred perfectly into the spot I built for it. And although that came out really well, it wasn't why I was smiling. I was grinning because I was so happy with my dust collection system. It took me about 2 years to go from conception to completed dust collection system. But now my clearvue is piped to everything in the shop, plus their are a few open blast gates to add tools here and their, it's really awesome. If I would have known how much I would love it, I would have done it 10 years ago.  


But instead after I outgrew my simple shop vac, I moved on to a 1-1/2HP single stage bag collector, and lived with that for a long time. Now, I already can't imagine life without my ClearVue. But I had this learning curve to get there.


Then, I thought about my table saw. I've gone from a Craftsman table top model, to a contractors saw, to a contractors saw built into a cabinet, to today where I have a SawStop Industrial Cabinet Saw with side and outfeed tables. It's awesome. But again, it took me several tries to get there.

 

I thought about my router table. I've had 6 or 7. This is my 3rd version of my lumber rack, my second version of my clamp rack, my 3rd sharpening system. The more I thought about it, the more I realized I don't get anything right for the shop on the first try. Perhaps my dovetail saw, I've only had one of those?

 

So my question to the group is: Have you ever built something for your shop where you got it "right" on the first try? I don't mean because you are living with it's deficiencies, but because you can't imagine improving it. My dust collection, My SawStop, My lumber rack, My clamp rack I don't think I'll ever change (although, you never really know) because i can't imagine how I can improve them right now. But all of these things took me several tries to get there.

 

By the way, if I ever finish my roubo, I hope to add that to the list. But again, I will have gone through a half dozen benches to get there.

Yep, several things. My Delta left tilt is my first and only TS. My bench will be the one and only. I did just upgrade my lathe to the 3rd and final. Just one miter saw, one wide sander, one planner. Did have 2 jointers. I have a lot of one and onlys and a few things that took several tries to get right.

BRuce

I was gonna say Roubo.  My previous benches weren't really benches...more like work surfaces.

 

And that's all I can think of.  Everything else in my shop is a reincarnation of some other tool.  But those days are over.  No more mistakes in my future. :P

  • 1 month later...

I completely love this post.  Ive had a bunch of things ive made for my shop that i thought we a nessessity and ended up bein changed.  Havent mad a true bench yet so when i do knock out my roubo i assume that will be the one and only...had a few table saws, but the one thing i got right is my 18 in laguna band saw...I had a freebie band saw before that so maybe this doesnt count but i read about how it isnt important to have a band saw with a powerfull motor. i would equate that to a yugo can get me from point a to point b the same as a ferrari, but ill take the ferrari...needles to say i love my bandsaw

Everything I have built or bought for my shop was right the first time because it was what was needed at the time and had to do with the way I did things at that particular time.

 

When I built my shop I just slapped up some temp shelves out of chip board because I knew I might change it and wanted to start using the space. 5 years later nothing changed so I tore out those temporary shelves and made and installed my current permanent cabinets. 

 

My wife got it right when she bought me my Ridgid TS3650 table saw for Christmas and I just recently built a mobile base for it that incorporates the router table and other storage.

 

For dust collection I started with the delta 1 hp bagger but that's all I had room for before I built my current shop. Once I got to working in it and saw how it was lacking I built my own 5 hp cyclone with the biggest impeller I could get and connected all my machines.

 

I don't consider any changes people make to their shops as getting something right or wrong but more of and evolution in how they work and use their space.

Replaced a Craftsman contractors saw( 60's vintage) with a brand new UniSaw in the 80's. Picked up a 2nd UniSaw used in the 90's and put an Excalibur sliding crosscut table on it. Those were some good investments. Not sure what I would buy today but neither of the saws show any signs of wearing out. That sliding cross cut table is awesome. The new version has upgrades I would love to have but mine still cuts dead square on up to 61" wide panels!

  • 2 weeks later...

What I call the boat flipper.  My first build was a 14.5 foot skiff, and I needed a way to flip it over while working on it.  64E376B2-9983-4E49-A8E4-BCB12EBCC037-125

 

In the picture above, the boat is suspended on seat belt webbing. The system is
comprised of 4 2x4s, each of which were temporarily bolted with carriage
bolts to a piece of 2×10 screwed in between the joists of the ceiling.
At the end of each 2×4 was a boat winch, and 8 inch rollers were placed
between the ceiling joists to the inside of the 2x10s, as shown below:

 

2AE3452C-562F-40A5-B84F-95B9B085A730-592

 

The seat belt material was fastened to
the boat winch, run up over the adjacent trailer roller in the ceiling,
down under the boat, up over the trailer roller on the other side, and
fastened to the winch. There was a pair for the bow and the stern. The
boat was lifted by cranking evenly on both sides (which necessitated
running from side to side and stem to stern) , and could be flipped by
raising one side and lowering the other, to the point where the boat
could be pushed gently over.

This system was derived from a system I
saw in an old article from Woodenboat magazine, which detailed various
methods of turning boats.  It was an alternative to the BPB method –
Beer, Pizza and Buddies to help flip the boat over.

  • 3 weeks later...

I'm a newbie woodworker and there are definitely things that will be replaced later but now that I know that I will be doing this the rest of my life I am investing in some better tools. I just bought the DeWalt 12" SCMS and I hope that will be a lifetime tool. But for me it has to do with budget. My next big purchases will be a planer and jointer. I plan on getting a good lunchbox planer and then getting a good 8" jointer. When I find the limits of the planer I will have to decide if I should upgrade or maybe a drum sander would be the better option to work with the planer.

Getting into woodworking. I got that right. Everything else, that's another story.

The grass is always greener...

I have some high quality tools, but I am always considering buying new ruff. I love my TS, but dream of buying a sawstop. I love my jointer, but always drool when I see Marc's in the podcasts.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.