hd03king Posted November 24, 2015 Report Share Posted November 24, 2015 Ok when I was cutting the bottom for the table I cut it to 27 1/8 long instead of 27 1/4. I forgot to factor in the blade width. I already cut the short and long aprons too. Can I just take cut a 1/8" off the long aprons and call it good? Or am I missing something else this will effect?thanksDave Quote Link to comment Share on other sites More sharing options...
JerrySats Posted November 25, 2015 Report Share Posted November 25, 2015 Don't see why you can't do that . Quote Link to comment Share on other sites More sharing options...
prov163 Posted November 25, 2015 Report Share Posted November 25, 2015 (edited) Just reconfigure based on the actual size. When I do something like that, and I'd guess we all do occasionally, I just decide that's the size it's going to be and adjust accordingly. It's only an 1/8" so it has a negligible effect on the overall project. Just keep on building!!! Edited November 25, 2015 by prov163 Misspelling Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.