Recommended Posts

Posted

Anybody have any experience with Edge Belt sanders? I have a Ridgid osselating belt sander but I am needing something bigger for a recurring order project. I see a Jet Osselating 6 x 89 belt and a Grizzley 6 X 80 . Any reccomendations? Both have a 4" dust port I can hook up to a dust collector.

Posted

So nobody on this board has any input about edge sanders? Any brand? Pitfalls or operating tips! Need to do quick smoothing of assembled parts to flush up the surface for lamination. Got to keep it 90 degrees to the face and sand all 4 edges of hundreds of pieces.

Posted

Steve, eventually I want to buy an edge sander. I want one that I can put a larger belt on and add in a partial ellipse platen. Let us know what you find.

Posted

I just sold my PM it worked fine for door edges which is all I used it for. With the advent of spiral shaper heads It wasn't necessary to keep. The dost collection on all of them is not great. I had the jet for years it did the job for doors but was not all that. It was hard to keep the table at 90. The lightweight machine just seemed to vibrate itself apart.

Posted

I found one review on the Jet and the guy came up with a bracket and pin to fix the table at 90 degrees. The PM is way out of my price range for this machine. Just a small 2 man custom shop. But we have a recurring order for 100 of these laminated display shelves at a time.

Posted

It's a very handy tool to have around.  Get the oscillating one if you can.  Someone also fabricated a large dust shroud that improved DC  greatly.  I haven't paid much attention to them since I got my Bridgewood years ago, but when I was looking for one there was talk of the grizzly being top heavy and unstable.  

00001.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.