duckkisser Posted March 9, 2013 Report Posted March 9, 2013 anyone ever use this brand band saw was looking to get a cheaper small bandsaw to rough cut carvings and maybe resawn small boards. http://www.menards.com/main/tools-hardware/power-tools/saws/10-masterforce-band-saw/p-1498051-c-9082.htm Quote
pghmyn Posted March 9, 2013 Report Posted March 9, 2013 A guy at work bought their planer, and he is satisfied. I warned him about lunch box planer snipe, and he said as long as a few inches were added, the rest of the board was consistent. Not bad for the price. Quote
Levi Rathje Posted March 10, 2013 Report Posted March 10, 2013 My dad has the 14" it cuts wood OK.the frame of his isn't very heavy and it vibrates a lot. It's louder than your more known models but does work OK. Quote
duckkisser Posted March 10, 2013 Author Report Posted March 10, 2013 levi could you find from your dad how well it resaws i have a small box that i need a band saw to use to cut it and i would like to cut the box lid off acuratly. if it cuts acuratly i will go buy it. Quote
jimmykx250 Posted March 10, 2013 Report Posted March 10, 2013 Duck- I have a 12" used delta that i just dont use. It has a stationary stand with it. If you are interested pm me and I can send pics. I havent listed it for sale because it's something i got from my dads collection after he passed away but i need to be honest with myself. I have a 14" craftsman that is set up and i just dont have room. Let me know. Quote
duckkisser Posted March 10, 2013 Author Report Posted March 10, 2013 just went and looked at the masterfoce band saw it looks well built at least as well as the smaller older jets that i have seen difference might be in the motor or how true it stays. wont know unless i buy it and work with it. the bearing set up thats on does not looks like it can be ajusted and there is quite a bit of play between the blade and the bearings. the only way i can see to get the bearings closer to the blade is to put in larger bearings or to buy a whole new guide system. can someone tell me if im wrong but if the bearings are touching the blade then the blade will not move side to side as badly? Quote
Byrdie Posted March 11, 2013 Report Posted March 11, 2013 The thing to remember about "Masterforce" is that it's basically a house brand that Mennards contracts. I have the Masterforce contractors table saw and it's the same saw that's sold by Rigid and Craftsman under their labels. Quote
CT Proctor Posted March 11, 2013 Report Posted March 11, 2013 Just come over and use my bandsaw. Quote
duckkisser Posted March 11, 2013 Author Report Posted March 11, 2013 thanks CT i might but i think that ill take my form that i bent my wood around and cut it on the table saw and let the form suport my super thin wood. dont know that a band saw would be acurate enough. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.