Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

grizzly band saw 14" onsale

Featured Replies

grizzly just put a anniversary band saw on sale for 100 less so its 445 instead of 545 thinking i might buy one for myself. thats if it will fit.  

Where did you see ad? Went to their site and couldn't find it.

Interested myself.

I saw the 17" anv model in person today. Its a shame all the anniversary logos are stickers, instead of something sufficient like the original grizzly badge

  • Author

Don't care it's just a machine and its on sale :) I don't buy shop tools or furniture for looks but instead to destroy

A good bandsaw is a smart investment. I resawed some boards today and lots of times when the tablesaw is set up for a certain cut the bandsaw is a quick substitute. Rip, cross cut, curves and so much more. Then you can tilt the table and enter an entire new world of angled curved cuts...... So much versatility in a small footprint. I have cut firewood into a useful plank. With the right blade you can cut metals.

Skip the 14" and go straight to the 17", unless for some reason you can't get 240V to the shop. Skip the Polar series as well and go straight to the one with the heavy duty cast iron wheels. I "made do" with a 14" bandsaw for quite a while (10+ years). Wish I would've bought the 17" originally.

I got an advertisement with 10% off coupon for Grizzly a week or so back. That should cover the cost of the shipping.

If you don't do any resawing, then no, you probably don't need the 17". Then again, when I bought my 14", I didn't do any wood turning. Now that I do wood turning, the 14" just couldn't handle the larger pieces I was putting through it.

Reminds me - I need to buy some more blades. Got a catch on the bandsaw while resawing (yeah, first time for everything) and busted the blade. Was a bit scary. Thank goodness I was using a push stick!

  • Author

http://www.grizzly.com/products/14-Deluxe-Bandsaw-Anniversary-Edition/G0555LANV here is the 14 for dimar

 

http://www.grizzly.com/products/17-2-HP-Bandsaw-Anniversary-Edition/G0513ANV here is the 17

 

big e can you send me that 10% code i might buy the tool measuring out the closet im wondring if i can fit it into. would love to have a 17 but to be honest i dont even know if i can fit the 14 in my little corner of the basement.  im literly puting it in a closet so they i can do some cutting and when i get a real shop i can shift over.   but i might have to stick with a 10" band saw just i can resaw small boards to make small boxes. 

Start with the 14" if at all possible. A 10" bandsaw will frustrate you pretty quickly. 17" is nice if you have the funds and room but the 10" is going to get replaced. If I was going to get a 10" I would look for a used one, cheap!

Go at least 14". I made do with two 10" band saws for a long time and finally found a year old Jet 18" on Craig's List for $800.  They're out there...it's just a continual scouring until it pops up.

I bought the Grizzly 14" bandsaw on sale for this price last year and love it.  I use it all the time from preparing bowl blanks, to resawing flat stock to fine curves and bandsaw boxes.  Be aware that it is very heavy so getting it down to your basement could be a problem.  You will likely have to do that while it is still in boxes and then assemble it in the basement unless you have walkout.  The boxes are pretty big though, too.  Not sure about doorway clearance.  If you are considering a very tight space in your basement, make sure to account for adding a mobile base when measuring your space.  You will definitely need one.

  • Author

ok i didnt buy that bandsaw but instead a guy in the paper was selling a jet 14" band saw for 150$ looks like its in good condition but it will need a little work to get it set up he was selling because he was moving out of the state to warmer weather.  was selling all his tools cheap but like usual day late. just need fence maybe better guide system.

 

http://www.amazon.com/708115K-JWBS-14CS-Horsepower-Woodworking-Graphite/dp/B00006ANS4 here is basicly the machine just older and different color the guy said he bought it new 12 years ago.

 

big E you want the code back since im not using it maybe give it to someone else?

You can give it to someone else if you want. I don't know if it is coded only to me or not...

They're not coded to anyone in particular....a forum member gave me a Grizzly code to buy my TS

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.