Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

moving into a new shop and need some advice

Featured Replies

I am moving into a new shop...I'm super excited but it does create some head scratxhers...atleast to me. It is a commercial space 50'x40' which is twice as big as my current space, and its closer to home and cheeper rent believe it or not...the problem I have its all steel stud framming and I have know idea how to attach my lumber rack securely...I have a beefed up version of the rack marc built ...the only difference is I added 2" plywood strips behind the support studs because I found the vertical stretxhers were crushing the drywall and this made it more sturdy...and I bolted thru the support stud,plywood,drywall and into the wall stud with 7" ledger lock screws...so that's where my problem comes in...how can I get the system to hold all the wait if I can't use the ledger locks. I'll try to post a pic

post-1984-0-60548800-1364487799_thumb.jp

post-1984-0-64231400-1364487850_thumb.jp

Ask yourself the questions. "Why do I need to put a wood rack on the wall?"

" do I need the space under the wood rack"

"Is the wood rack going to run from the floor upwards?"

I would (and have gotten rid of mine) dispense with a wall mounted rack completely and get some industrial floor standing racking. The floor will take any weight you can throw at it. I got a rack 10feet long x 6 foot 6 high x 2 foot deep that takes all my lumber and has a rating of 5500 lbs or 2 1/2 tons. This is the sort of racking used in warehouses. Have a look at my blog (link below) for my experiences with lumber racks.

Well said Terry.

I had a chat with a guy who sells racks at last years W12 exhibition  . He had a very valid point in that when a building is designed it is very unlikely that is would be designed to take the cantilever and pressure forces of a rack. Thick carefully before bolting your rack to the wall.

  • Author

the problem is the kind of rack you are talking about is expensive and i already have a system that has worked well for 3-4 years.  what did you pay for the rack you were describing terry,  if the wall cant take the load then im going to have to look for an alternative but i would like to solve the problem with what i already have.  to answer your other questions, i would like the rack to hang on the wall...my plans are to have the rack start about five and a half feet off the ground and go up th twelve feet so that i can use the space under the rack

Take your time with those head scrachers. It is very important that your get it right the first time. Nothing worse than doing some thing twice. Speed and efficiency are key. 

Really spend the time laying it all out.
 

 

 

http://williamolsendesigns.com/

If you have the space you can buy racks like you see at home depot. I see them on crags list all the time. I bought 30ft for my warehouse years ago for about $500. You probably dont need all that much.

This might be an option for you...

Keep the method you have, exactly. But, make it semi floor mounted. What I mean by that is attach vertical members to the front of the "shelves" and have them mounted to the floor. All the weight would be transferred vertically rather than horizontally and rotation ally. Can't be more expensive than a couple 2x4's. and if it doesn't work out, you can always remove them.

Metal studs are C channel. Rip framing to fit tight inside the C and reframe those load bearing studs. This would require a little drywall repair if the walls are already covered but such small repair should not be expensive.

On another note, I have seen comments other places about walls not supporting the weight. 2x4 stud walls on 16 inch centers will carry an entire 2nd story load on truss carrying eave walls. This wall will easily carry several hundred pounds of lumber if properly designed. Single studs will not. The design is the culprit in a stick frame. This is why racks fall and buildings do not. Tie the weight to enough studs and stick close to the wall for success.

Just kind of spitballing here, but what if you made your own "rack wall," using 2x4 inside a torsion box portable wall?  Make the base heavy and sturdy (perhaps with some plywood storage, or off cut storage bins, or clamp racks, or a small mounted sub-workbench), attach them to some casters, and hinge a couple together to make a flexible wall that you can fold back on itself or use to separate one section of the shop from another?

 

Obviously, you'd need a base or floating floor for the wall to offset the center of gravity, and I'd imagine you would need trusses to spread the weight on the lower edges/ corners of the wall assembly, but I'd think it would be possible.  You might even be able to anchor one end of the flexible wall to a pole or the existing wall, making it that much sturdier.

 what did you pay for the rack you were describing terry,  

 

It was £240 bought new. I guess you would be able to get something similar in the US for around $200 brand new but Craigs List is your friend :) . Somebody may well be selling some used stuff.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.