Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Help identifying an old stanley plane

Featured Replies

I had mentioned to my uncle that I was getting in to wood working and he said he thought there might be some old hand planes tucked away somewhere in the basement of his house (He lives in a house that my great grand parents built in 1928)

 

We pulled out a toolbox that my uncle swears has not been moved in 50 years and there were 3 planes inside amonst some other old hand tools (rasps, chisels, etc)

 

I scored an old #5 that should clean up quite nicely, a block plane that is kind of beat up which might not get restored, and an unmarked smoothing plane (well, I think it's a smoothing plane but I am a complete novice).

 

I snapped a few pictures. It's 9 1/2 inches long and the sole is 2 1/4 inches wide.

 

I am thinking it could be a number 4?

post-13757-0-35674500-1364749790_thumb.j

post-13757-0-09922100-1364749791_thumb.j

post-13757-0-72360400-1364749791_thumb.j

Hi Chuck,

 

If you want info overload take a look at this site . Sounds like you have 41/2 smoothing plane to me. If you want to restore them this guide is well worth looking at. I hope to treat my Record planes to the same treatment when I get the time.

  • Author

G S,

 

Thanks for the reply (well, thanks for all of your patient replies in the threads I have started).

 

That is a pretty serious restoration process, it definitely shows better results than the other plane restorations I have seen.

There is a difference between sole length-iron width and sole length-sole width.

My Stanley Craftsman #4 has a 2 1/2" wide sole with a 2" iron.

My 1930s Stanley Bailey #4 has a 2 3/8" wide sole also has a 2" iron.

You likely have a #4 but measure the iron instead of the sole to compare with the Stanley ID charts.

Also, the sole length should be measured subtracting the handle "tang" at approx 1/2".

Chuck,

 

Sorry for the bad advice! Even though you were very clear I was not paying attention and though you were talking about blade width (2 1/4). Like Jerry say could be a 3 or a 4.

Hi Chuck,

 

If you want info overload take a look at this site . Sounds like you have 41/2 smoothing plane to me. If you want to restore them this guide is well worth looking at. I hope to treat my Record planes to the same treatment when I get the time.

+1 on Blood and Gore. Not sure what it would be at 9-1/2" long though :(

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.