Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Computer in the shop

Featured Replies

I decided I would put my desktop computer into my shop. There was an old cheap desk down there that no one was using, so it suited my needs.

 

I plan to add some sort of filtration system for the intake fans on here, but haven't decided the method just yet. I'm just happy to have the computer in the shop because I do most of my work from CAD drawings and such. Really helps to be able to rotate the model in real time instead of looking at static pictures. Also, the countless hours of YouTube woodworking videos I can watch without the fiance saying, "YOU'RE WATCHING ANOTHER ONE ABOUT THOSE BIRD TAIL THINGS?!"

I just move my old home theater pc that I wasn't using out to my shop. I'm not sure what life was like before I had a computer permanently out there!

You could also build something that will be fanless pretty cheaply and just leave a dust cover on the tower.

 

Aftermarket dust filters can work, but they are better build into the case. Antec cases usually have filters and would be my first suggestion along with Lian Li if want something aluminum.

  • Author

You could also build something that will be fanless pretty cheaply and just leave a dust cover on the tower.

 

Aftermarket dust filters can work, but they are better build into the case. Antec cases usually have filters and would be my first suggestion along with Lian Li if want something aluminum.

The PC is a custom built one. Old, but it still works. I hand picked all the components, and put it together :)

 

I am not against some modifications to the case. I was thinking something that could just slide over the openings and be removed to be cleaned every now and then.

Mine is a custom build as well. It is in a Silverstone HTPC case. The fans have washable plastic/foam filters that seem to work pretty well. If your fans don't have that you could retrofit your case fans with filters. I'd really only be concerned with the intake fans.

Dont' forget that your power supply has it's own intake fan. Aside from the hard drive that will be the most succeptable to dust.

  • Author

Dont' forget that your power supply has it's own intake fan. Aside from the hard drive that will be the most succeptable to dust.

I have 4 fans on my case, total.

 

- 1 intake on the power supple.

- 1 exhaust on the rear (biggest fan).

- 1 intake on the front that goes over two hard drives. The front and rear fans are directly in line to have the air flow in line and circulating over the hard drives, video card, and motherboard.

- 1 smaller exhaust fan on the side of the case.

 

Also the small fan on the CPU, I guess that counts as 5. I'm thinking I can cut up a furnace filter and retrofit it around the fans some how. Doesn't need to be pretty, just needs to catch some dust.

 

I just ordered a CT midi vac for my Festool system, so here's to hoping this will greatly cut down on my dust :)

I just have my laptop in mine.  No special filters, etc.  It's been fine for quite a few years.

Build a box with one side that will accept a furnace filter so the whole filter is being used instead of just a small portion. This will keep constant air flow and keep everything dust free.

I have an old laptop in the shop as well.  I have it up and out of the way, with an external monitor on an arm.  It does get dusty, but I just simply vacuum it off.  Other then that, nothing special on it.  I don't keep any data on that computer.  Any Sketch-Up drawings, PDFs, etc I pull off our home network.   So if anything bad happens to the computer, I am not really out of a whole lot.

I use an older laptop, too...   Since I'm pulling off the network, if it dies, I won't lose anything I care about.     I turn it off when not in use, so it's not sucking air in when I'm making dust or spray mist.  I can't use machines, or most other dust producing tools while I also use the computer, so why leave it on.

 

Rather than screwing around with special filters, enclosures, etc...  Why not just locate it in the cleanest corner of the shop, and turn it off and cover when not in use?   Most desktops can also "sleep", which powers all the fans and drives down but allows to to quickly resume use.

 

If you store your files on your "main" computer, you can ensure they're backed up, and you've not lost much if your shop machine's disk bites the dust.

  • Author

I use an older laptop, too...   Since I'm pulling off the network, if it dies, I won't lose anything I care about.     I turn it off when not in use, so it's not sucking air in when I'm making dust or spray mist.  I can't use machines, or most other dust producing tools while I also use the computer, so why leave it on.

 

Rather than screwing around with special filters, enclosures, etc...  Why not just locate it in the cleanest corner of the shop, and turn it off and cover when not in use?   Most desktops can also "sleep", which powers all the fans and drives down but allows to to quickly resume use.

 

If you store your files on your "main" computer, you can ensure they're backed up, and you've not lost much if your shop machine's disk bites the dust.

I'm not planning to really over complicate it. I think I will just tape some furnace filters over the openings for now and see how that works. If that doesn't I will go further.

The only computer I would put in a woodworking shop is a tablet;
I use an iPad.  My iPad has all of my
tool manuals, articles (pdf), plans,
etc.  I protect it with an excellent case,
“Lifeproof” by nüüd (The case is
waterproof to 6.5 feet
) and I also have a screen protector.  Since the iPad has WiFi capability, I can look up
anything on the internet without leaving the shop.  I did have to purchase an external WiFi drive
that holds 64 GB because I wanted “instant” access to my tool manuals, articles
and plans.  I definitely love the ability
to search for anything on my iPad.

The only computer I would put in a woodworking shop is a tablet;

I use an iPad.  My iPad has all of my

tool manuals, articles (pdf), plans,

etc.  I protect it with an excellent case,

“Lifeproof” by nüüd (The case is

waterproof to 6.5 feet) and I also have a screen protector.  Since the iPad has WiFi capability, I can look up

anything on the internet without leaving the shop.  I did have to purchase an external WiFi drive

that holds 64 GB because I wanted “instant” access to my tool manuals, articles

and plans.  I definitely love the ability

to search for anything on my iPad.

I guess it depends how much dust you make.  I have a really good DC system, so don't get any more dust than our house with the ambient air.  I probably get a bit less, because my shop is built better than my house.   ;)

  • Author

I guess it depends how much dust you make. I have a really good DC system, so don't get any more dust than our house with the ambient air. I probably get a bit less, because my shop is built better than my house. ;)

I can't wait to get an over arm dust collection for my table saw.

I can't wait to get an over arm dust collection for my table saw.

It's a must in my shop.  I hate that few cuts I make where I have to move it out of the way.

I use an older laptop, too...   Since I'm pulling off the network, if it dies, I won't lose anything I care about.     I turn it off when not in use, so it's not sucking air in when I'm making dust or spray mist.  I can't use machines, or most other dust producing tools while I also use the computer, so why leave it on.

 

If you store your files on your "main" computer, you can ensure they're backed up, and you've not lost much if your shop machine's disk bites the dust.

 

I use dropbox for this and it works really well. Same concept, but for those that are less computer savvy it's easier than messing with a home network and you can get your files even if you're not on the network.

  • Author

It's a must in my shop.  I hate that few cuts I make where I have to move it out of the way.

I'm too cheap to buy one, so I am thinking about making one.

 

I am going to make the part that goes over the blade from plexiglass, so I can see through it, and then some PVC piping. I'm not looking for perfect dust collection, but more than I have now.

 

Also, I had an idea regarding dust collection from the cabinet of my saw. I do not have my dust collector with 4" hose yet, but I had an idea to efficiently spread out the suction of a regular shop vac. I want to make something that would look like a downdraft table top and mount it in the cabinet of my saw. Just underneath the trunnion assembly so to not be in the way of the motor tilting. But it will suck the dust in from all over when it starts flying. I will have to draw it up to better explain it, probably.

I'm too cheap to buy one, so I am thinking about making one.

 

I am going to make the part that goes over the blade from plexiglass, so I can see through it, and then some PVC piping. I'm not looking for perfect dust collection, but more than I have now.

 

Also, I had an idea regarding dust collection from the cabinet of my saw. I do not have my dust collector with 4" hose yet, but I had an idea to efficiently spread out the suction of a regular shop vac. I want to make something that would look like a downdraft table top and mount it in the cabinet of my saw. Just underneath the trunnion assembly so to not be in the way of the motor tilting. But it will suck the dust in from all over when it starts flying. I will have to draw it up to better explain it, probably.

I think there has a been a thread on here from a home built overarm DC guard.  The tablesaw collector sounds interesting.   You'll have to let us know how that works.  I've got big sheet magnets over some of the holes in my TS and used silver tape to lessen the air gaps in the ribs where the top sits on the cabinet.  It has helped suction quite a bit.  You, of course, don't want to seal it too well, or it can't suck.  

I guess it depends how much dust you make.  I have a really good DC system, so don't get any more dust than our house with the ambient air.  I probably get a bit less, because my shop is built better than my house.   ;)

 

 

Vic, do you have a video of a shop tour? I would like to see your shop!

Vic, do you have a video of a shop tour? I would like to see your shop!

It has changed since.  I redid my SCMS station and added a big torsion box for outfeed, assembly, bending a miscellaneous other tasks that need power.  I try to keep my handtool side powerless.  Here's the tour and the torsion box build.

==> I guess it depends how much dust you make.  

 

exactly.  I have decent DC, but it can't capture everything.  I use an iPad and it works AOK.  

 

My main computer is based around a silverstone case -- It's got a couple of cooling fans and wouldn't put it in the shop -- even with the little dust in my shop, I bet the tower would accumulate excessive dust like crazy in no time.  The only thing I could recommend is to try it for a month and see how must dust it collects...

I'm a computer engineer, I have 2 PCs turned on the the garage. I just blow out with 90PSI about 1 time a month. I have seen much much worse PCs in people's homes because of Dog and Cat hair (big hair balls). :lol:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.