Recommended Posts

Posted

One space two tools. Im looking at both of these tools for medium production of small curved goods, jigs,templates, and the occasional skunk or reindeer for the yard. Ive had equal experience on both. Both tools are readily available via craigslist in the heavier duty format. Do you guys have any input? Im staying away from the imports, making sure i choose wisely so that i dont have a table top dust collector. I also like making keychains :P

Posted

Spencer, unless you plan on making small figures or working on pieces 2" square I would go with the small bandsaw. Get a couple of blades like a 1/4" & 1/8" and you can cut pretty darn small curves. You will also be able to use the bandsaw for larger pieces and thicker material. I have a 9" bandsaw and am able to cut up to 3 1/2" thick. Dust collection is handled by a shop vac and dust deputy. I bought thus little bandsaw 3 yrs ago and have never regretted it. If I had a scroll saw I don't think I would use it more than once a year.

Posted

A bandsaw has a continuous circular band. A scroll saw uses a double ended blade that just moves up and down. The key is that the scroll saw has an up stroke so it is not a constant cut so you have to go slow. A scroll saw can start in the center of a board with a pilot hole a band saw needs an exit kerf. Scroll saws can use tiny blades some the size of tiny wire that will make very tight corners. Any band saw would be considered HD compared to a scroll saw that is made for delicate work. Cutting your pink flamingo's for the front yard is going to give the scroll saw a work out that its really not made for.  But if you want to make little intricate veneers and things like that the scroll saw is the way to go. I would suggest you look for a used Hegner on craigslist if you plan on going the scroll saw route. 

Posted

Third option: A good jig saw

 

A decent scroll saw is the last scroll saw you're going to buy.  A small band saw inevitably leads to a larger band saw.  If you go the band saw route just skip the small one and don't get anything smaller than a 14".

  • 6 months later...
Posted

Quick update here... I went to check out a delta 14" bandsaw from a craigslist ad back in april. The guy wanted $400 for it and the PO was deceased. It looked like it came from a school with the paint etc. so i passed. He did however have a Delta 40-440 sitting in the corner. I had never seen one in person and it was very substantial.

For $150 i got the saw, rolling stand plus an extra table, 3 drive shafts assemblies and another bucket of misc. parts.

After i got home i began to get buyer's remorse.

It was suuuper loud and clangy. Nothing was straight and the machine was sopping wet with oil.

Since it was a birthday present, i kept my mouth shut an continued to look for a solution.

6 months later i have a gold mine. Turns out the PO scrapped parts from several other saws to make this one a hot rod. From the variable speed attachment to the matching rockwell flare leg stand with wheels that retract, to the $500 driveshaft upgrade, and 6 backup chucks, its incredible. A guy named bob vaughn on owwm has documented a lot of his work on these specific machines. The castings are very similar to the powermatic 95 and many rockwell, homecraft scroll saws.

I'm not much of a scroll saw guy but if i can cut 7/8 hard maple on a 1/8" radius, it works for me. Through my journey, i also realized how rare and precious parts are for these machines and all old machines for that matter.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined