Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Starter Tools of the Trade.

Featured Replies

Perfect start to what?  Buy the tools you need to build the project you have in mind.

  • Author

My wife and I have an interest to fix things around the house, and now to build things.  So as total newbies to the game, we decided to go with power tools, as we like to keep things simple.  We intend to build a kitchen cabinet for starters, already fully furnished, but she wanted something more, a wonderful kids bunker bed: http://www.lulusoso.com/upload/20120307/2011_modern_bus_bunk_bed_for_kids.jpg 

I got to fill em by EOY.  Anyway, that's a whole different ball game, no pun intended.  So to start with I have the following plans.

 

1. Skil Jigsaw - Purchased with some extra thin blades for curving out wood.

2. Skil Drill with screwdriver bits - Purchased online.

 

3. Sander (octo detail sander, and palm sander) she liked the octo sander, I doubt we will find the replacement pads in india.

4. A decent router.

 

5. 8x4 feet plywood sheet and

6. Veneer or glossy laminate. (if I get the sander soon I go for veneer).

 

I guess I need a lot of glue and screws with than angle brackets, but I'm open to any/all advice.

Recommendations for a perfect start.

 

...Realistic expectations that things won't go perfectly.   ...that and some idea of what sort of things you want to accomplish, and some knowledge of what the tools do, how to set up shop, joinery, and finishing techniques are very helpful.  http://www.newwoodworker.com/nwhbook.html

 

Everyone's approach and views are a little different, but a good table saw is the number one tool in my shop (and most wood shops).  It's the tool that I put the most resources into.  A router and a router table are incredibly versatile too.  If you'll work with a lot of lumber, a planer and/or a jointer give you the ability to flatten, straighten, and dimension lumber.  If you'll mainly be using sheet goods, a planer and jointer are less important.  A good work surface is important....you'll need to be able to glue and clamp things, so a good working stash of clamps is handy.  You'll also need the ability to sand....you can start with sandpaper and a sanding block, or you can buy a sander. 

  • Author

...Realistic expectations that things won't go perfectly.   ...that and some idea of what sort of things you want to accomplish, and some knowledge of what the tools do, how to set up shop, joinery, and finishing techniques are very helpful.  http://www.newwoodworker.com/nwhbook.html

 

Everyone's approach and views are a little different, but a good table saw is the number one tool in my shop (and most wood shops).  It's the tool that I put the most resources into.  A router and a router table are incredibly versatile too.  If you'll work with a lot of lumber, a planer and/or a jointer give you the ability to flatten, straighten, and dimension lumber.  If you'll mainly be using sheet goods, a planer and jointer are less important.  A good work surface is important....you'll need to be able to glue and clamp things, so a good working stash of clamps is handy.  You'll also need the ability to sand....you can start with sandpaper and a sanding block, or you can buy a sander. 

I'm keeping my fingers crossed, hopefully we get it right the first time :), I'm going to start with something a bit smaller.   I will try to get that book you suggested, but I'm not much of a reader.  

You are right about the table saw, but I feel guilty even getting a good knife set for my wife, she cuts her hand and I feel guilty, so I'm keeping the table saw out.  Moreover I need something I can pack and put it out of reach and lock it down, I have a two year old who is twice and inquisitive as I was at that age, and even more naughty than I care to explain.  So for the benefit of the family lets take some more extra time and use the smaller gig. (Jigsaw).  Whatever happens, I will try to post details about our attempts here :).

The jigsaw is fine for roughing out curves, but I promise you're going to be frustrated if you try to cut straight lines with it...that's just not what it's made for.  At the very least you need a circular saw and a straight edge.  Even the most basic projects require straight and square cuts.  Try a project or two with that jigsaw, and dollars to donuts you'll be sniffing around for something better...every shop needs a tablesaw or bandsaw...one or the other at the very least...unless you dig the Neanderthal style.

 

I have a three year old and a six month old...and a shop full of tools.  If you're worried about your kid's safety...unplug.

  • Author

Ever since we started looking into woodworking, we realize more and more that everything around us is routed, etched or something to do with a router.  So I decided to get our first router:

http://www.amazon.co.uk/Black-Decker-KW900EKA-Router-Speed/dp/B000Y8ZEVI

 

I normally go for all Skil tools but this seems to be available at half the price ? What's the catch ? Anyways Skil router is not available in India officially.  

Also anyone here ever tried using a car orbital polisher for sanding ?  Just found a sanding pad that fits into my Skil 9070, since it has adjustable RPM can this be done ? I am expecting a dustier experience, since it has no holes on the pad for suction, but will sanding cause any damage to the equipment ?  Thanks in advance for your expert advice :)

  • Author

The jigsaw is fine for roughing out curves, but I promise you're going to be frustrated if you try to cut straight lines with it...that's just not what it's made for.  At the very least you need a circular saw and a straight edge.  Even the most basic projects require straight and square cuts.  Try a project or two with that jigsaw, and dollars to donuts you'll be sniffing around for something better...every shop needs a tablesaw or bandsaw...one or the other at the very least...unless you dig the Neanderthal style.

 

I have a three year old and a six month old...and a shop full of tools.  If you're worried about your kid's safety...unplug.

I was not aware of cutting straight lines issues with the jigsaw, that got me thinking how about I create a Jigsaw table for that, I somehow think of the big circular saws a bit nasty for home, specially when I don't have a dedicated garage for it as of now.  So here is something I found a special table setup: http://www.wolfcraft.com/uploads/tx_commerce/6197AW1N.jpg,

I could combine and build a router/jig table as shown here for our first project: http://lumberjocks.com/projects/66601, maybe not so complex, a bit scaled down approach...

For what it's worth, not impossible to cut a straight line with a jigsaw. On the odd occasion I need to do this, I reference a trusty straightedge / square off the side, line the jigsaw up with the cut mark, butt the square up against the jigsaw base to reference off of, and CAREFULLY cut. Go slow, otherwise the blade may bend and your cut is compromised. As said, it's not the most efficient tool, you have to prepare and anticipate for tearout (the right blade and wood prep helps), and you'll want to trade up to something intended for straight line ripping very quickly, but it may get you by for a while until you do.

 

Speaking of squares, not the most exciting answer in a power tool forum, but if I had to do it all over again the very FIRST thing I would have spared no expense on - even before power tools - would be a trustworthy precision square. And not the stuff you see at the big box stores, but something well machined with precision in mind, something you can count on. Reason is that a good square will often be the basis of your whole shop, from checking to see if lines are in square to calibrating much of your equipment for 90 degree cuts.

Ever since we started looking into woodworking, we realize more and more that everything around us is routed, etched or something to do with a router.  So I decided to get our first router:

http://www.amazon.co.uk/Black-Decker-KW900EKA-Router-Speed/dp/B000Y8ZEVI

 

I normally go for all Skil tools but this seems to be available at half the price ? What's the catch ? Anyways Skil router is not available in India officially.  

Also anyone here ever tried using a car orbital polisher for sanding ?  Just found a sanding pad that fits into my Skil 9070, since it has adjustable RPM can this be done ? I am expecting a dustier experience, since it has no holes on the pad for suction, but will sanding cause any damage to the equipment ?  Thanks in advance for your expert advice :)

 

I'm not much into car detail, so someone correct me if I'm wrong, but doesn't a car polisher spin and buff in a rotary motion (ala the rotex mode on Festool sanders)? If so, my thought on that is that it might be difficult to obtain a fine sanding as random orbit sanders have a 'random orbit' pattern to help with swirls.

I have never been pleased with the speed or quality of straight line jigsaw cuts. If you think even a circular saw is too big or nasty for the home it really seems as though you are not looking for power tools. I would encourage you to ask and answer that question before you invest money in tools.

  • Author

For what it's worth, not impossible to cut a straight line with a jigsaw. On the odd occasion I need to do this, I reference a trusty straightedge / square off the side, line the jigsaw up with the cut mark, butt the square up against the jigsaw base to reference off of, and CAREFULLY cut. Go slow, otherwise the blade may bend and your cut is compromised. As said, it's not the most efficient tool, you have to prepare and anticipate for tearout (the right blade and wood prep helps), and you'll want to trade up to something intended for straight line ripping very quickly, but it may get you by for a while until you do.

 

Speaking of squares, not the most exciting answer in a power tool forum, but if I had to do it all over again the very FIRST thing I would have spared no expense on - even before power tools - would be a trustworthy precision square. And not the stuff you see at the big box stores, but something well machined with precision in mind, something you can count on. Reason is that a good square will often be the basis of your whole shop, from checking to see if lines are in square to calibrating much of your equipment for 90 degree cuts.

Thats useful advice, I did not know much about straight edge, I've never seen any workers using it, or the need for precision square, now I'm looking more into it.

I'm not much into car detail, so someone correct me if I'm wrong, but doesn't a car polisher spin and buff in a rotary motion (ala the rotex mode on Festool sanders)? If so, my thought on that is that it might be difficult to obtain a fine sanding as random orbit sanders have a 'random orbit' pattern to help with swirls.

 

Depends.  You have the rotary polishers that are just spinning head directly on the motor like the rotex mode on Festools.  They're not used as much anymore.  Usually only when trying to fix a bad scratch.  They've lost favor since it's easy to burn through the clear coat with them and they can cause holograms.  The main polishers used these days are stuff like the Porter Cable 7424 or the Flex XC 3401.  Both are random orbit polishers and work similar to a random orbit sander, the disk spins while the entire head oscillates.  

 

I thought of using my PC for sanding but decided against it and bought a dewalt RO sander instead.  it wasn't worth the hassle  to find a backing plate that would work and pads that would fit it.  I'm also paranoid about getting some dust or splinters into it that might then scratch my car while trying to fix scratches. :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.