Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Highlighting the age of old wood...

Featured Replies

i'm in the process of making a carved sign for the front of my workshop. The sign is made from 2 old pine boards i found in abandoned farmhouse a few years back, they must be almost  80 years old...

 

I would like to give the signs a finish that makes them look old and aged but not being too dark, as the carved lettering will be painted  black. I would like the board colour to remain quite light brownish, but still have a finish that will make the wood pop out and highlight the "scars" it has on it.

 

I though of using the vinegar and steel wool, but every example i have seen turns the wood too dark.

 

 

Any suggestions?

Hi KK

 

Some of our clients have items stripped using a dip (not a good idea imo), I think its very similar to caustic soda and leaves the pine looking browner. Perhaps rubbing it with regular paint stripper might do the same (before the lettering is painted   ;) ).

 

Will it be mounted inside or outside?

Or add a light tint to your finish, then sneak up on the color you want with multiple coats. A marine varnish is going to be quite amber before you add any tint.

  • Author

Thanks for the tips! The sign will be mounted outside. I have a can of boat lacquer in the shop which has a very amberish tone to it.  It is urethane alkyd based,so what tint could be used to add the colour? A paste? a powder tint?

 

I would try the liquid universal colorant like the paint stores use in exterior paint, at very low levels. I am pretty sure most of the water or alcohol soluble dyes are going to fade in exterior sunlight.

Or maybe artist acrylics? Do some testing on scraps of the same wood.

Van dyke brown is a friend of mine for glazing, instant antiquing of pine in my opinion. I would paint the lettering, then spray the rest of the piece. Here is a pirate's chest I made for the boys last year with a van dyke glaze.

if the wood is old and you want it to look old then why add color? are you sanding/ planing down the boards? I've had good luck with rustoleum ultimate polyurethane. they offer an exterior product with UV blockers which i've used for many outdoor full sun benches and tables. The finish is still going strong after 3 years. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.