Recommended Posts

Posted

In a moment of stupidity, I failed to notice that the fence was in the way of the cut on my Festool MFT (with the wood to be cut obscuring it) and my blade went just a little bit into it on a cut. After immediately stopping and upon inspection of the blade, I noticed that one of the tips had been knocked off as in the photo below. Fortunately it was my 28 tooth blade that I only use to break down large and long hardwoods (would have been more furious if it had been the 50 tooth) and once I corrected the fence I was still able to complete the cut.

 

I've never broken a saw tooth before, and before I jump the gun, toss this into the can and run out for a new blade, I am curious if something like this is repairable. It only looks like the tip is off, nothing on the main tooth seems broke and the rest of the blade appears to be fine. Thoughts?

 

 

post-6550-0-95779500-1367692323_thumb.jp

Posted

The teeth are not the same kind of metal. They are welded on. This changes nothing that has been said but simply explains how and why the blade is repairable by most any good sharpening shop. I have a local and have no need to ship.

Posted

While I'm for supporting locals, just went through a ridiculous scenario with a local sharping place on my planer blades as I waited two weeks for them to tell me one blade was bent (and apparently they sent it out, suggesting they don't sharpen planer blades themselves), Then nearly two more weeks for WoodCraft to try and get replacement blades. Only for me to give up on them, turned to the web and have a new set of planer blades in under three days.

 

The point being, I contacted Forrest and will look to have it sent out, sounds like it would be a lot quicker than going through the above again. Glad to hear it's fixable, thanks a bunch.

Posted

Ends, if you can find a local sharpener that is good, it will save you a ton of money. Go to several of your local cabinet shops and ask them who sharpens their blades. Let them know you are a hobbyist and are looking for someone reliable. Most of them will give you the info that you need if they don't consider you competition. You might also ask them about their lumber sources while you are there and kill two birds with one stone.

Posted

==> if you can find a local sharpener that is good, it will save you a ton of money.

 

a ton of money over Forrest?

 

OK, each sharpening may be a few $$ more and you have some UPS costs -- but for the 2-times a year the typical hobbyist sends-out sharpening, what's the $20 compared to a guaranteed top-shelf job?  I agree it's a good idea to ask what your local guy is doing -- can't hurt and maybe there is a local sharpening service that's good...  But I've done the 'local thing' and had some very mixed results -- one sharpening was great, followed by a poor result when the 'top guy at the shop was on vacation' --- now I only use Forrest. 

 

==> You might also ask them about their lumber sources while you are there and kill two birds with one stone.

 

that's always a good idea... We used to have an awesome hardwood dealer here -- After 30 years, he closed down...  Now I piggy-back on my local cabinet shop's orders...

Posted

It is all relationship. A college buddy works in the office of the shop I referenced. They won't mess me around. They Are dedicated sharpening and repair in a cabinet driven economic system. Manufactured homes factories and RV factories mean that cabinet type shops are a dime a dozen here. There is so much business to be had that a company of il repute could not survive the competition. It really depends on your market, but a great relationship with your local will almost always beat out shipping cost and project lag for guys who cannot justify keeping multiple high dollar blades. I take your word for it that Forrest is a top notch service provider, I only encourage doing some research before spending more than you need to.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 35 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined