Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Convince my boss to buy ts75

Featured Replies

So for work i do alot of breaking down of sheet goods. Cabinetry is also done all the time there too. I want a festool track saw for all that, if i could put a factory edge we would go through so much less material an my job would be alot easier.

So to propose this idea to my boss what should be my primary speaking notes. Mind you he is a 60 something old school cabinet maker so at first glance he will think thats $700 for a glorified circ saw with a straight edge.

So for work i do alot of breaking down of sheet goods. Cabinetry is also done all the time there too. I want a festool track saw for all that, if i could put a factory edge we would go through so much less material an my job would be alot easier.

So to propose this idea to my boss what should be my primary speaking notes. Mind you he is a 60 something old school cabinet maker so at first glance he will think thats $700 for a glorified circ saw with a straight edge.

Take him to demo it.

So to propose this idea to my boss what should be my primary speaking notes. Mind you he is a 60 something old school cabinet maker so at first glance he will think thats $700 for a glorified circ saw with a straight edge.

It is. What do you use now? Why less waste with track saw?

==> It is. What do you use now?

 

good point, but i do seem to get much better results w/ TS55 on sheet goods and much more efficiently.

 

For a decade I used circ saw / straight edge prior to getting the TS55 and, for some reason, the results were just not the same.  I tried different blades and saws -- was never completely happy with my results as compared to what I was seeing at FT demo days...  Also, for some reason, the setup seems faster -- don't ask me why -- but I can carve-up a sheet more quickly with a 55 then a circ/straight edge...  Maybe just the way the track lays down and stays there or the smooth-riding of the saw on the track surface...  Maybe just the skill of the operator.... Don't know, but the difference is real (for me)...

 

As for TS55-vs-TS75 -- I've got both.  The TS55 is much better suited to sheet goods.  I'm eBaying my 75 soon -- haven't used it in six months... The TS55R is due to be released in NA fairly soon (June?).

I'd make an efficiency argument. Yes, you can make jigs and buy devices and straight edges that will work fine and they certainly get the job done, but much less fiddling with the track in a 'time is money' scenario. Thirty seconds to a minute of difference won't be a big deal to infrequent sheet good use, but if you're batching out as many as you say, that would add up.

==> Thirty seconds to a minute of difference won't be a big deal to infrequent sheet good use, but if you're batching out as many as you say, that would add up.

 

Is a track saw the right tool for the job?  You may want to look at a sheet-oriented Tablesaw...  There are lot's to choose from and several members of this board have experience with them...

Trying to convince an old cabinet maker that anything other than a trusty cabinet saw is needed for sheet goods is going to be difficult. If your building conventional kitchen boxes there is no reason to buy a track saw. You will waste more time and save no money on materials it will only cost lots more money in the long run. Most of us can rip a full sheet of plywood faster than you can get the tracksaw out of its plastic box. I rip my side panels and cut the 1/2 rabbets or 1/4 dado's at the same time in a single pass on a plain jane cabinet saw. For the the homeowner or the contractor that is working on site tracksaws are great but they have no place in a cabinet shop with overhead.

  • Author

Well without boring you guys with details, i basically do a little of everything. I come from a framing background and am now making this factory function efficiently and rewire everything, new rooms, lighting etc.

Because this is a smaller company there is so much ineficiency in how we use our tools... Especially with big rips off the delta unisaw. I am building an outfeed table now but for most applications a tracksaw would work possibly better than the current methods of cutting.

Well without boring you guys with details, i basically do a little of everything. I come from a framing background and am now making this factory function efficiently and rewire everything, new rooms, lighting etc.

Because this is a smaller company there is so much ineficiency in how we use our tools... Especially with big rips off the delta unisaw. I am building an outfeed table now but for most applications a tracksaw would work possibly better than the current methods of cutting.

It would be hard to help you find reasoning based on the info. Rips on TS are more efficient. If you are doing lots of stuff that has lots of full width cross cuts thats another story. But a tracksaw isn't the tool, something like panel pro selling for just a little more than the ts75 would be efficient.

It would be hard to help you find reasoning based on the info. Rips on TS are more efficient. If you are doing lots of stuff that has lots of full width cross cuts thats another story. But a tracksaw isn't the tool, something like panel pro selling for just a little more than the ts75 would be efficient.

Do you think something like the Panel Pro would be accurate enough and stand up to a working cabinet shop?  I currently run old school 2 cabinet saws.  Always a bottle neck when squaring panels

Trying to convince an old cabinet maker that anything other than a trusty cabinet saw is needed for sheet goods is going to be difficult. If your building conventional kitchen boxes there is no reason to buy a track saw. You will waste more time and save no money on materials it will only cost lots more money in the long run. Most of us can rip a full sheet of plywood faster than you can get the tracksaw out of its plastic box. I rip my side panels and cut the 1/2 rabbets or 1/4 dado's at the same time in a single pass on a plain jane cabinet saw. For the the homeowner or the contractor that is working on site tracksaws are great but they have no place in a cabinet shop with overhead.

 

+1 . Not sure how much second hand industrial machines are in the US but I would personally prefer a panel saw like this . The one shown is a our recent purchase although we did make do with this one for 20 years and before that it was a straight edge and circ saw. The one we recently sold went for about $1000.00 and IMO (and bearing in mind each company is very different) I would rather have an old industrial machine than a track saw.

Do you think something like the Panel Pro would be accurate enough and stand up to a working cabinet shop?  I currently run old school 2 cabinet saws.  Always a bottle neck when squaring panels

 

Yes they are fine. I would ask why you bottle neck squaring panels? What are you building that needs a panel perfectly square full size panels?

I guess my bottle neck is trying to get the panels perfectly square when they don't really need to be.  The shop I worked in before opening my own had a SCMI slider so square and strait panels was no big deal.  Using my panel jig i get really good results and can normally cut up an entire kitchen worth of parts in about 2 hours.  That is about as quick as I need to be. 

I guess my bottle neck is trying to get the panels perfectly square when they don't really need to be.  The shop I worked in before opening my own had a SCMI slider so square and strait panels was no big deal.  Using my panel jig i get really good results and can normally cut up an entire kitchen worth of parts in about 2 hours.  That is about as quick as I need to be. 

 

If your using a crosscut sled you may just be making to many squaring cuts that are causing a bottle neck. Just like a slider you only need one square end. 

Without knowing your workflow its hard to say but you should not have a bottle neck with squaring especially with kitchen cabinets. Maybe a topic for another thread.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.