Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust Collection

Featured Replies

Well, this is what I went with. Hopefully Don is right and my 220v option is a simple as he made it seem. Fortunately my wife is out of town for the next 2 weeks, which should give me enough time to figure this out before she gets home.

Don- I am probably going to need your help if you don't mind.

Get some photos posted. I'm sure we can step you through it.

  • Replies 65
  • Views 13.2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Well, this is what I went with. Hopefully Don is right and my 220v option is a simple as he made it seem. Fortunately my wife is out of town for the next 2 weeks, which should give me enough time to f

  • davestanton
    davestanton

    John, no. I am using flex grey plastic which is remarkably smooth on the inside. I laid it under my cabinets with a removable kickboard to get to it if needed.

Posted Images

James - congrats! That unit has a lot of good reviews, and should serve you well. I hope you figure out the power feed.

Good choice. I went with the same unit back n March. Much better than my Jet DC650. I'M currently using the 4" inlets with a single 4" hose. Might change over to a 6" hose and use a reducer at the tool. If you are using the 4" inlets and only using one of them, you will need to order another inlet cover. Only comes with one.

Adam

Just a note on the chippings getting clogged at the inlet.  I had the issue with my small Rikon DC, and noticed it was the cross bars that was causing it.  While there is risk associated to it, I cut those out. This completely solved the clogging issue.

Good choice. I went with the same unit back n March. Much better than my Jet DC650. I'M currently using the 4" inlets with a single 4" hose. Might change over to a 6" hose and use a reducer at the tool. If you are using the 4" inlets and only using one of them, you will need to order another inlet cover. Only comes with one.

Adam

When I switched from 4 to 5 inch ports, I was amazed at the difference. I would highly recommend it.

When I switched from 4 to 5 inch ports, I was amazed at the difference. I would highly recommend it.

A 5" pipe has 56% more cross sectional area so I'm not surprised you noticed a difference. I have mine reduced from 5 to 4 just because I had 4" pipe but I plan on going to 5 at some point.

I am running 5 inch to all my machines with a 4 inch reducer at the point of acquisition. Works a treat.

I am running 5 inch to all my machines with a 4 inch reducer at the point of acquisition. Works a treat.

Dave - is that metal pipe you are using? I am currently using a 4" sewer&drain pipe which is easy to use but I can't find it in 5" so I might go metal...

John, no. I am using flex grey plastic which is remarkably smooth on the inside. I laid it under my cabinets with a removable kickboard to get to it if needed.

  • Author

Get some photos posted. I'm sure we can step you through it.

 

Here are a couple pictures of where the outlet is located. The last picture is the other side of the wall in the garage. There is a gas line under the 220v which I am a little concerned about. 

post-104-0-67590500-1370054724_thumb.jpg

post-104-0-29891100-1370054725_thumb.jpg

post-104-0-89678400-1370054725_thumb.jpg

James,

If you were my neighbor I'd do this for you and all it would cost you'd be a steak and a beer. Isn't there anybody in your unit who could do this for you reliably. Not sure what your specialty is but every unit I've visited buddies in had at least one handyman minded person.

John, no. I am using flex grey plastic which is remarkably smooth on the inside. I laid it under my cabinets with a removable kickboard to get to it if needed.

Nice pug!

Here are a couple pictures of where the outlet is located. The last picture is the other side of the wall in the garage. There is a gas line under the 220v which I am a little concerned about.

Is the wife gone yet? Go switch off the breaker to the dryer and remove the plug, mark the wires as you see fit. Go get one of your wife's favorite coat hangers and cut off the straight section. Sharpen one end on your grinder. How do you want the new 220 installed. Flush in the wall or flat against for easy removal and repair??? Either way go to HD and buy a couple feet of wire they have it bulk no need to buy a roll. For in the wall get a remodel box for flush get a surface box. Grab some wire nuts while your their and dont forget your outlet. Then come back and we will keep going.

  • Author

Is the wife gone yet? Go switch off the breaker to the dryer and remove the plug, mark the wires as you see fit. Go get one of your wife's favorite coat hangers and cut off the straight section. Sharpen one end on your grinder. How do you want the new 220 installed. Flush in the wall or flat against for easy removal and repair??? Either way go to HD and buy a couple feet of wire they have it bulk no need to buy a roll. For in the wall get a remodel box for flush get a surface box. Grab some wire nuts while your their and dont forget your outlet. Then come back and we will keep going.

Wife is gone. I am going to go with flat against the wall for easy removal and repair. What kind of wire should I get? 12ga or 10ga? Do I need romex or the insulated wiring?

Wife is gone. I am going to go with flat against the wall for easy removal and repair. What kind of wire should I get? 12ga or 10ga? Do I need romex or the insulated wiring?

12/3 or 10/3 is fine. 12 is fine for 2hp.

  • Author

12/3 or 10/3 is fine. 12 is fine for 2hp.

Romex or Insulated extension cord wiring. Is this going to be wiring for the box?

  • Author

Romex.

Got it. One more question. My dryer outlet is a 4 prong outlet, do I need 12/4 Romex?
  • Author

Last question, my breaker is 30 amps, does it matter if I put a 20 amp outlet on it?

  • Author

Don-

Do I want to use the current dryer outlet box as junction box? I Need your help to move forward and to make sure I don't electrocute myself  :D

That is easiest and most code worthy. You cut dog legs off of your new wire and splice your feed, your new outlet takeoff and a dogleg to feed your dryer outlet together in one wire nut. Match your colors up and you should be good. Did you do like he recommended and label or photograph your existing outlet in order to get the wires hooked up properly? This is the only tricky part if you don't do it all the time.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.