Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust Collection

Featured Replies

  • Author

That is easiest and most code worthy. You cut dog legs off of your new wire and splice your feed, your new outlet takeoff and a dogleg to feed your dryer outlet together in one wire nut. Match your colors up and you should be good. Did you do like he recommended and label or photograph your existing outlet in order to get the wires hooked up properly? This is the only tricky part if you don't do it all the time.

I have not disconnected the wires yet because I did not want to have exposed wires without going directly to the next step. How do I feed the new wires through the wall. The current box has drywall all around it. Do I need to remove the box and see what's behind it? I am thinking about shutting off power to the main breaker just to be safe, is this overkill?

post-104-0-22545900-1370120527_thumb.jpg

post-104-0-55833200-1370120528_thumb.jpg

post-104-0-90248100-1370120529_thumb.jpg

  • Replies 65
  • Views 13.2k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Well, this is what I went with. Hopefully Don is right and my 220v option is a simple as he made it seem. Fortunately my wife is out of town for the next 2 weeks, which should give me enough time to f

  • davestanton
    davestanton

    John, no. I am using flex grey plastic which is remarkably smooth on the inside. I laid it under my cabinets with a removable kickboard to get to it if needed.

Posted Images

That's likely why Don had you find a wire coat hangar. Poke a hole next to your dryer box through the other side of your garage wall. The coat hangar will let you feel if there is anything if you are careful. Once you find the other drywall and push through it then I would do your other work from the garage side. Cut yourself a small access hole to feed wire from the garage into the dryer box.

How the mice will play when the cat's away!  I'm laughing while read this - not objecting to it, just more having happy memories!

  • Author

That's likely why Don had you find a wire coat hangar. Poke a hole next to your dryer box through the other side of your garage wall. The coat hangar will let you feel if there is anything if you are careful. Once you find the other drywall and push through it then I would do your other work from the garage side. Cut yourself a small access hole to feed wire from the garage into the dryer box.

Ahh, that makes sense. I am just about ready to get started but have one last concern. I bought a 20 amp outlet but I really feel like I should have gotten a 30 Amp outlet instead. I have to run an extension cord that I made out of 12/3 to operate the dust collector. The dust collector has a 14 AWG with a nEmA 6-15 plug, which is what I have on the female end of my extension cord. 

  • Author

I got a little hung up tonight and was having some problems. I think I cut the romex a little too short and I was not happy with where I had the box. I did see that there was stud just a few inches away and I may just cut the drywall, get a different box and mount it to the stud. 

I got a little hung up tonight and was having some problems. I think I cut the romex a little too short and I was not happy with where I had the box. I did see that there was stud just a few inches away and I may just cut the drywall, get a different box and mount it to the stud.

If that is what will make you feel better about your new 220 line, more power to you. When does the dust collection arrive?

James you just want to mount the box to the wall right? If you push the coat hanger through the wall along side the dryer box you will be at the stud . Use one of the dryer box knock outs. Push the hanger all the way through the wall. Tape your new wire to the coat hanger. Enlarge the garage side to fit your new wire and just pull it through. You should be left with a wire hole and a couple screw holes to fix when you leave.

There is no need for a 30a outlet your not doing this to be inspected. You know not to plug in something that draws 30. It's to get you by until you move.

Your going to splice three / three wires together in the dryer box with wire nuts. Your existing , your new garage wire and add a short new section for the dryer plug. It will be a tight fit so keep it neat but it will go.

  • Author

I didn't necessarily want to keep the dryer outlet. I was just going to remove it completely and turn that box into a junction box and put a cover on it. I now want to mount the other box on the garage side to a stud for a flush mount. 

I didn't necessarily want to keep the dryer outlet. I was just going to remove it completely and turn that box into a junction box and put a cover on it. I now want to mount the other box on the garage side to a stud for a flush mount.

Go swap your box for a remodel box. You don't need to hack a giant hole in the dry wall to make room to swing a hammer.

James, if you are not leaving your dryer hookup in place then use the dryer recept in the garage and return the one you bought. You also should not need to worry about Romex or wire nuts because you can pull the wire from your dryer box and into your garage box.

  • Author

I am getting closer. I just decided to turn the current dryer box into a junction box, that just seemed easier for when I have to rewire the old dryer outlet. I bought a remodel box and have run and connected the romex. I do have a couple questions. Can I leave the white wire disconnected and just put some electrical tape around it and cap it? The reason I ask is because my plug only has 2 hots and a ground the white goes unused. I do have a 4 prong plug but I just left off the prong that would normally connect to the white wire. Now I can't remember what my other question was.

  • Author

I now have it all hooked up and getting ready to turn the breaker back on. I am very nervous  :unsure:

  • Author

Still there? :)

Everything work out ok?

Still here  :D. Everything worked out fine. Thank you Don, Carus and everyone else for all your help. I am tempted to turn off the breaker when I am not using the dust collector, does this seem all paranoid  :blink: ?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.