Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Fuji mini mite 2

Featured Replies

  • Author

2 stage is not the greatest but will work. Honestly id spent the extra $50 and get the 4 stage listed on that same web page.

Thanks for your input. Forgive my ignorance, but what is the benefit of 4 stage?

Thanks for your input. Forgive my ignorance, but what is the benefit of 4 stage?

 

Simply put more air better atomization, finer finish. Better for todays high solids top coats.

Good catch I didn't even notice it didnt come with a gun.

:)

 

Don't forget, at that price, you won't get a gun...

good eye

==> Better for todays high solids top coats.

 

+1

 

You could 'get buy' with a two stage, but as Don mentions, today's stuff has a higher solid content.  Just get 4 stages and future-proof the investment.  The real $$ is in guns -- you won't be happy with just one!

If you won't be spraying latex paint, a 3 stage will work just fine. Each stage helps with atomization and also adds more "kick" that's needed for thicker materials (latex paint). I bought the mini mite 3 last year and like it a lot.

Adam

A 4 stage is night and day difference between a 2 or 3 stage. Even finishes like precat lacquer which are pretty thin spray much finer. You can use smaller needles to get a very fine finish at a fast rate. For finishes like lacquer this really helps because your not relying on the finish to level as it dries it can go on more level to begin with. Your also not relying on thinning to use smaller needles. Even a 4 stage is not quite as nice as compressed air but is acceptable. A 5 stage is right there with compressed air.

I've used 2-stage, 3-stage, 4-stage and 5-stage.  PB is correct, there is a big difference between 2-stage and 4-stage.  It's not that 2-stage or 3-stage can't do a decent job, it's just that finishes are increasing solids all the time.  You are really limiting yourself going 2/3 for what's not really that much $$ in the grand scheme of things.  Especially when you add a couple of decent guns...

 

BTW, I spray a couple gals a month of pre-cat lacquer and a 4-stage can adjust a much finer mist over a 2-stage.  Both a 2-stage and 4-stage settles-out just fine, but I can 'get away with more' using a 4-stage w/ finer spray -- like inside corners, box interiors, backscatter, etc.

I guess it really comes down to what you will be spraying and how often. If only the occasional project, like me, save your money and apply the savings to extra gun/needles. If spraying a lot, like HHH, then go for the 4 stage.

To give you an idea of prices, the web page above showed a $50 difference, but did not include a gun with 4 stage. Amazon shows a complete Fuji 4 stage system for about $150 more than the 3 stage.

==>  If spraying a lot, like HHH, then go for the 4 stage.

 

it's not just 'spraying a lot', but what you spray and how fine a finish you get for your effort....

 

Because of adhesion, WB finishes need fine atomization to get a really nice lay-down...  If you spray shellac and lacquer all day, use a 2 or 3 stage -- it's going to be fine...

 

Charles Neil did a video on 2-vs-3-vs-4-vs-5 stage turbines on WB finishes.  Like he said, they all spray... but it was clear from the demo that there's a distinct difference as you increases stages.  again, you can get the job done with any of these tools, but the higher stages permit finer atomization.  You can get a finer spray (and finish) with the 4 and 5 stage offerings...

 

BTW, I own a fuji-4 stage and apollo-5 stage.  there is a small difference, but only when you get to things like latex.  I'm going to eBay my fuji this week...

==>  If spraying a lot, like HHH, then go for the 4 stage.

 

it's not just 'spraying a lot', but what you spray and how fine a finish you get for your effort....

 

Because of adhesion, WB finishes need fine atomization to get a really nice lay-down...  If you spray shellac and lacquer all day, use a 2 or 3 stage -- it's going to be fine...

 

Charles Neil did a video on 2-vs-3-vs-4-vs-5 stage turbines on WB finishes.  Like he said, they all spray... but it was clear from the demo that there's a distinct difference as you increases stages.  again, you can get the job done with any of these tools, but the higher stages permit finer atomization.  You can get a finer spray (and finish) with the 4 and 5 stage offerings...

 

Agreed, so many times you read about folks that dont spray much so they assume a lesser method must be ok and and the higher powered stuff is just for production. This simply not true. This goes for compressors and turbines.  A lot depends on what your expectations are for the final finish. One guys idea of a good finish may be a lot different than the next. One guy may not mind turning expensive finish into sandng dust to make up for poor equipment while another may want to spray and be done with it. With spray equipment the equipment choice does make a difference.

Because of adhesion, WB finishes need fine atomization to get a really nice lay-down...  If you spray shellac and lacquer all day, use a 2 or 3 stage -- it's going to be fine...

 

 

Not to mention...  Most water based finishes have very limited thinning potential, often 5-10% max.  Too much thinning will destroy the chemistry of the finish.   You can thin lacquer and shellac a lot more, and simply spray more coats.

I had a 2-stage and after over a month of test boards, just couldn't get it to perform. Every once in a while it would put down a decent finish but reproducing it again was tough. You have to have everything just right - viscosity, shop temp, shop humidity, wet mils thickness, fluid control. In the end it just didn't perform as advertised and I returned it. I ended up getting a Fuji Mini-mite 4 and it is so much easier to use and the results are so much better. 

 

Later I read a FWW article on spray equipment and they couldn't get a 2-stage to produce enough air pressure for waterbornes. They tried all kinds of settings but couldn't get it to atomize without spattering the finish. 

 

Being through the experience, I would skip a 2-stage and spend the extra money on a 4-stage. It will cost you more but save you a bunch of frustration down the road and should last a long time. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.