Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Teak dining room table HELP!

Featured Replies

We bought a teak dining room at a very good price - chairs excellent condition - table not so much, it had some hairline scratches here and there - I decided to refinish - I am sanding by hand and taking the finish off - and now I am totally baffle as to what to do next once I finish sanding it - do i use a grain filler? if I use teak oil (Watco, Scan Care, Danish Oil) what do I use on top to make it smooth and glossy -- like the original finish? I used Scan Care oil just to see what happen and the color was right but it did not have a glossy smooth look ... So I took it off

Any help or/and advice will be greatly appreciated it

  • Author

We bought a teak dining room at a very good price - chairs excellent condition - table not so much, it had some hairline scratches here and there - I decided to refinish - I am sanding by hand and taking the finish off - and now I am totally baffle as to what to do next once I finish sanding it - do i use a grain filler? if I use teak oil (Watco, Scan Care, Danish Oil) what do I use on top to make it smooth and glossy -- like the original finish? I used Scan Care oil just to see what happen and the color was right but it did not have a glossy smooth look ... So I took it off

Any help or/and advice will be greatly appreciated it

post-14183-0-52689500-1371430768_thumb.j

  • Author

The table has two middle leaves which are darker - it looks they were not used much - I am thinking of refinishing them, hopefully I could get them closer to the table color. As you can see the border of the table that i have not sanded yet, do have some shine and are smooth to the touch -

PS the shadows on the table are from the chandelier - I still have not taken all of the finish off.

Those oils should be able to give you a decent shine and smooth finish if you sand between coats. You can also try shellac.

Teak is a very unique wood and has unique requirements for finishing. I would suggest you PM Boatworks for his opinion. He obviously uses a lot of teak on the boats and can give you better advise, based on experience. All I've ever used on teak is teak oil.

  • Author

That is what I thought that it was veneer, but aafter sanding it feels and looks like is teak, when sanding it gives a sweet smell and the dust is oily and clingy. The table design has been done a lot, there is even one that is solid teak with rosewood edges -but I am been careful with the sanding - just in case - since I am not an expert

  • Author

Oil.... that is the question, which oil? Watco Teak Oil, Danish Oil, Tung oil, Polymerized tung oil, Behlen Master Teak Oil, Rockler Tung oil.... soo many choices...any experiences with any of these?

==> Teak is a very unique wood and has unique requirements for finishing. I would suggest you PM Boatworks for his opinion.

 

+2

 

 

Many moons ago, I assisted on a teak project...  I seem to remember a two-part pre-finish step to naturalize Teak's natural oils/resins/etc for adhesion.  As stated above, I'd PM Boatworks...

 

Also, what about the chairs? if you are leaving them alone -- do you want to match the table to the chairs?  Do you want to replicate the original finish?  If you haven't completely stripped the table, Jeff Jewitt had an article on identifying existing finishes (I think in FWW in either '11 or '12).  

  • Author

Thank you !  - The chairs are perfect all around - I am going to search for the article on identifying the finihs.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.