haysflooring Posted July 7, 2013 Report Posted July 7, 2013 I would like to find a old push drill to use . Could someone give me a idea of some good models to look for? Maybe the Stanley 41 ? Quote
Tom King Posted July 7, 2013 Report Posted July 7, 2013 I have a 41 that I bought new. To be honest, I don't remember ever using it for much of anything. Our children used it when they were little. Make sure all the bits are in the handle before you buy it. Quote
haysflooring Posted July 7, 2013 Author Report Posted July 7, 2013 How many bits are they supposed to have 8 ? Are there other models I should look for or avoid ? Quote
Tom King Posted July 7, 2013 Report Posted July 7, 2013 STANDARD SET OF 8 BITS FROM 1/16"- 11/64" copied and pasted from one for sale on ebay for 279. I don't know anything about the different ones other than the one I have. I don't even remember my reasoning for buying it 40 years ago. For as long as I can remember, I reach for a cordless drill. Quote
TerryMcK Posted July 8, 2013 Report Posted July 8, 2013 Hey Joe, I googled and found this - you may have seen it. I've never owned a push drill but seen them in use by carpenters years ago before cordless drills. Quote
TobyC Posted July 8, 2013 Report Posted July 8, 2013 I have several, some have metal handles, some have wood. Some have a spring to keep the spiral shaft pushed out and some don't. But I've found that I don't use them very often, and the results aren't always satisfactory. What I want, and what may be better for you, is one of these. Quote
Tpt life Posted July 8, 2013 Report Posted July 8, 2013 Toby, I've never heard those egg beaters referred to a push drills. I am used to a push drill looking like a screw driver. Quote
TobyC Posted July 8, 2013 Report Posted July 8, 2013 They're not, I was offering those as a better choice. Sorry for the confusion! What I have are push drills and Yankee screwdrivers, the pic is from Google and I think they would be more useful, and they use regular bits. Again, sorry if I wasn't clear. Quote
Tpt life Posted July 8, 2013 Report Posted July 8, 2013 No sweat. I was not completely sure that you were not going to educate me on a regional difference. I also think I did not read your post as carefully as I thought I had. Quote
jHop Posted July 8, 2013 Report Posted July 8, 2013 My grandfather had 2 eggbeaters and one Yankee. (everybody's fighting over the yankee, and both the eggbeaters were neglected, now requiring massive work to rebuild.) The benefit of the Yankee push driver is that it's good for starting holes for smaller projects. I've also seen one (modern, I think) that took the slotted and Phillips driver bits, so it could be used as a toolbox driver... light duty. I'd like to get one because I occasionally need to mark the location of where I'll drill later, but am not anywhere near my drill or drill press (need batteries or a new cordless). With the Yankee, I can push in a straight line while holding it in place with one hand. With the eggbeater, I need two hands to start the hole. (But the eggbeater is sooooooooo (how many 'o's can I add in?) much more versatile.) 1 Quote
G S Haydon Posted July 8, 2013 Report Posted July 8, 2013 Yankee drivers, the choice of a crazy dude! Hear horror stories of hand and work stabs. Admittedly operator error but I still, one hand tool I don't want to invest in. Even P Sellers uses a Drill Driver! Quote
G S Haydon Posted July 8, 2013 Report Posted July 8, 2013 I have several, some have metal handles, some have wood. Some have a spring to keep the spiral shaft pushed out and some don't. But I've found that I don't use them very often, and the results aren't always satisfactory. What I want, and what may be better for you, is one of these. They look coll Toby if you want to make a nice fluffy meringue or a cake . Quote
TobyC Posted July 8, 2013 Report Posted July 8, 2013 Yankee drivers, the choice of a crazy dude! Hear horror stories of hand and work stabs. Admittedly operator error but I still, one hand tool I don't want to invest in. Even P Sellers uses a Drill Driver! Some of them came without the spring, the others you can remove the spring from the end of the handle. A lot of old timers wouldn't have one with the spring because of those issues. If you have it compressed and locked and it releases it will fully extend with a lot of force. Quote
G S Haydon Posted July 8, 2013 Report Posted July 8, 2013 "If you have it compressed and locked and it releases it will fully extend with a lot of force" One of those Bayeux Tapestry moments Quote
TobyC Posted July 8, 2013 Report Posted July 8, 2013 They look coll Toby if you want to make a nice fluffy meringue or a cake . They're also great for drilling holes with precision and control! Quote
TRBaker Posted July 8, 2013 Report Posted July 8, 2013 I bought my first Stanley Yankee push drill back in 1978, along with a Yankee screw driver. I used them for years to install cabinet hardware. The push drill is great for pilot holes for hardware screws and the screw driver was the best thing we had available when I first got into the cabinet business. With the invention of the Vix bit, I put my push drill away and use a cordless drill for all my hardware installations now. Of course, the Yankee screw driver was a cordless drill, but the horse power depended on you. 1 Quote
haysflooring Posted July 9, 2013 Author Report Posted July 9, 2013 Thanks guys . I what one for a couple of reasons. I have 5 or 6 cordless drills I use for work or for when I want to get it done right now, and I have a couple of eggbeaters I use in my shop . But I want a push drill for pilot holes and one handed stuff. Plus because I want a new toy. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.