jmaichel Posted August 10, 2013 Report Posted August 10, 2013 Has anyone ever used Ohishi Waterstones? LN sells them and I was curious if anyone had any experience with them. Quote
wilburpan Posted August 17, 2013 Report Posted August 17, 2013 I tried them at a Lie Nielsen event. They seem to work quite well. I use Shapton Professionals, and wouldn't sell my waterstones to get the Ohishi waterstones, but if I was in the market for new waterstones, I would consider a 1000/3000/10000 grit set of these. Quote
jmaichel Posted August 17, 2013 Author Report Posted August 17, 2013 Thanks Wilbur, There is very little information out there about the Ohishi Waterstones. I am deciding between these and the SIgmas. Quote
Freddie Posted August 17, 2013 Report Posted August 17, 2013 I just bought the 1000 and 3000/10000 combo. They are great. I also bought the dia flat lapping plate to keep the stones flat. Im just gonna make a jig for the honing guide so i keep things repeatable, and life just gets simpler from there. Quote
Tom King Posted August 17, 2013 Report Posted August 17, 2013 I looked at them, and what Lee Valley is offering. If I was buying water stones now, those are the ones I'd get. I like the fact that you don't have to soak them. About the only water stone I own that gets used to amount to anything, is the Norton 8,0000, simply because it doesn't need to be soaked. When I build the new shop, it'll have a sink with hot and cold water, but I don't always have that now. I flatten water stones on a surface plate with wet-or-dry sandpaper. Rinse the paper off and leave it out to dry, and you can use it many times Surface plate on sale at Woodcraft now for 25 bucks, which is very useful for other stuff too. Freddie, I don't have that lapping plate, but I do have a similar DMT diamond stone that I used to use for flattening stones. If you haven't used it yet, hang onto it, and spend the 35 bucks total or whatever shipping adds to the $25 surface plate. It's also great for flattening chisel backs, plane iron backs, and small plane soles. I'll bet the cost of the surface plate that you'll decide to send the lapping plate back and put that 200 bucks towards something else. Quote
Freddie Posted August 18, 2013 Report Posted August 18, 2013 Sorry Tom, I already proudly used it. Plus, it comes with a certificate for flatness, I'm keeping it haha Quote
Tom King Posted August 18, 2013 Report Posted August 18, 2013 You might be able to clean it up enough. The surface plate comes with a map that shows you where it's off by the one ten thousandth, and you can use any grit of abrasive on it that you want to. I keep a sheet of 100 grit handy for flattening of water stones. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.