Recommended Posts

Posted

Hey guys !

 

been a long time since my last topic on that board.

Had to go away from woodworking for 6 month. Bad story (found a good job outside of my city).

 

Well i'm now on vacation and have to finish a quick project i began 6 month ago. Its a Rockid for my best friend's newborn. It's a total Plywood+tracksaw+jigsaw+sanding  project

9493226847_d3d8fc065d_c.jpg

 

The construction is almost over, waiting for finishing, but i'm having a hard time smoothing the rocker curve! It's the first time i make one.

When I sit on it and I "rock", I feel some nasty edges on that curve that makes the "rocking" not smooth at all.

But i can't manadge to smooth it out by hand sanding. I find it very difficult to really "feel" thoses edges by running my fingers on the curve.

I was thinking about using a router and a pattern. I tryed to make one with cardboard but i don't find it smooth enough too.

 

So i need your help guys, whats the good method. Creating a curved sanding block? Seems sifficult since i don't have any bandsaw. Well a still can try with my Jigsaw for a narrow sanding block.

 

WHat do you think?

 

Thank's for the help!

 

Brainkite

Posted

Have you seen the trick of bridging your sandpaper with a flexible strip of bending ply or lathe? Basically think of a long sanding block that can bend to the shape of your curve but also stays rigid to float the high spots.

Posted

With limited tools curves can be a pain. I would just cheat. Make yourself a template, do the best you can and make it out of something thicker like 3/4" mdf doesnt need to be perfect. Now go down to the hardware store and buy a cheap steel rule. I just bought a few at Lowes they were under $4 each. Screw the ruler right to the edge of your template with counter sunk screws. The metal will form a perfect curve covering any slight imperfections and flat spots. It will work with wood but not as well, wood tends to want to follow the flat spots the metal will not. Tack it down to your stock and rout with your bearing riding on the steel ruler.

Posted

The key to curves is a long continuos stroke, end to end  with a file or psa sandpaper stuck to scrap of wood. The entire radius needs to be sanded, if you don’t, your only making more flat spots. If you have to, make a weak solution of food coloring and dye the runners. When the dye is dry, run your sanding block or file over the runners and your flat spots will become apparent.

 

Hope this helps.

 

-Ace

Posted

The thing with rockers is you need to start off with a circular curve to begin with. If you start off with a more egg shape no matter how much sanding you do you will have a smooth egg shape and a lump in your rock. To draw your curve your using a ships curve or fairing batten. Really just anything that is uniform in hardness for its entire length. When you use sandpaper attached to a thin wooden strip you are fairing off the tool marks but your not fairing the overall shape. When you attach your fairing batten to your rough form your maintaining the shape and eliminating tool marks without the worry of sanding and shaping by hand. So essentially I just make the rough shape. Apply the fairing batten to the semi smooth form and use this to make my template. No sanding is really needed to come up with a rocker that rocks smoothly. 

Posted

Re-read your post....the runners are already attached and your glued up. Maybe try some psa sandpaper located on a flat surface (floor) under each runner. With a helper, using the weight of the chair try to roll up and drag to sand smooth. Sounds crazy I know.

 

-Ace-

Posted

Okay, thak's for the awsome advices. I went with the simple sanding technique but i realisez that my curves weren't so bad when i put a flat piece of plywood under the rocker. Actually it was my floor doing it worth.

So i'm looking for a rubber joint strip to stick under the rocker so that it can absorb the edges either on the floor or on the rocker.

 

Anyway i have another trick for you guys (this project doesn't love me). Have you ever tryed green finishes with only natural component? The one that smells like fertilizer.

I used it once on a small plain oak project it was pretty good.

But I used it for one layer on that poplar plywood and I'm absolutelly not happy with the aspect. The poplar now looks dirty, like  washed with dirty water. The tint is not very uniform. It's beautiful on some faces but there's a lot of imperfections.

I'm now hesitating between giving a try for a second layer and see the result or painting everything and get over it.

I really don't have the time to sand everything and restart with a good old polyurethane finish.

 

Woodworking can really be a pain when you don't have the time and things goes bad...

I hate that.

Posted

Brainkite, Poplar is notorious for blotching when stained and tends to look "dirty" even with regular oil based stains. At this point you only have two quick options. One is to coat with a tinted poly, if you want to keep the stained look. Or you can paint over it. Nice looking project, btw.

Posted

I did not know that about poplar. My last project was a large working desk for my appartment with the same poplar plywood. I used a polyurethane semi-glossy finish, the result was beautiful.

I gave a try for that natural green finish because I knew it will be in contact with a baby and I don't want any bad substances in it. Maybe I should have just used the oil I use for kitchen oak work plane.

 

Do you think that a tinted poly will hide all the imperfections of the first laye. Will I have to choose a "dark" tint ?

Will this method work with a water based finish with less agressive substances?

 

Thanks for the help.  

Posted

I use a lot of poplar wood on my projects and stain them all the time. The secret to staining poplar wood is to sand it to at least 120 grit, put on a coat of shellac ( 1# cut) and then sand again with either 120 or 220 grit to knock down the fuzzies. (not much fuzzies with the alcohol as with water based finishes)  and then apply the stain of choice. The shellac coat seals the grain on most softwoods and helps a lot with blotching and the real nice thing is, it doesn't take long to dry.

A lot of times I use the "rude and crude" finish too. It is 1/4th BLO, 1/4th Mineral spirits, and 1/2 polyurethane. The BLO pops the grain, the polyurethane seals the wood and starts the first coat of finish, and the mineral spirits helps the mixing and speeds up drying time. 

Give it a try on the next shop project just to see how you like my methods.

 

Rog

Posted

If the project is mostly built already (especially if it's already assembled) there might not be too much you can do for the rocking action.  In the future, this would be a job for a big trammel arm.  Faring curves by hand with a flexible strip will certainly get you close enough for decorative curves.  But if you want a genuinely smooth rocking action, you need something that's geometrically perfect.

 

Could you line the bottom of the runners with something squishy?  Self-adhesive weatherstripping (or the like) jumps to mind.  Perhaps that would even out any unevenness in the rocking action.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 69 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined