Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

temporary insulation

Featured Replies

i need to insulate a shed for the winter but I want to pull the insulation off at the end of the winter so I can start putting it up in a garage next summer. anyone have any idea how I can mount the insulation to the wall short term?  never done any insulation work so I don't know what will work and what wont. 

Duck, if it's only going to be up for the winter, just staple the top two feet, on the tabs provided, on the wall applications. That will keep it from sliding down the walls. On the ceilings, use "tiger teeth" to put it up. They are stiff wires with points on either end. You bend them into place and when they straighten up the pointed ends dig into the joists on either side.

Agree with Baker for the walls but, for the ceiling, just put up some string to hold it in place.

Duck I would go with option 1. Buy unfaced roll or batt and staple plastic over it. The pros here do this as the plastic adds moisture and air infiltration value. It it quite easy to rip the plastic off and have super neat batt removal. The next best is to tack your faced roll or batt up with horizontal furring strips. This will work well for project #2 but will leave you drafty this winter.

  • Author

sorry was rushed forgot to mention that its a metal shed.

Duck tape is for sadists. Why would anyone want to tape up a duck? B)

 

+1......Duct tape would work on a metal shed.

  • Author

I love how brands can become so popular it changes the name like klenex rather then tissues or duck tape rather the duct tape

  • Author

so should I still use batts or unfaced or should I use panels since ill be tapeing up?

I'd use whatever I'm going to be using on the garage. If you don't know, then do batts.

I love how brands can become so popular it changes the name like klenex rather then tissues or duck tape rather the duct tape

 

Duck,

 

I think the Duck tape suggestion was meant specifically for you.

If you are going to be hanging and rehanging fiberglass bats, be sure to wear long sleeves, long pants and a dust mask.  That stuff gets into your skin.    Anectodally it seems the newer stuff doesn't "shed" as much as it did the first time I used it 20 years ago, but still.....

so should I still use batts or unfaced or should I use panels since ill be tapeing up?

 

If your garage is attached to your house, you'd better check your local codes. Then go which ever way meets code.

I would use ridgid foil faced sheets and tape the seams. You could add a few strips of wood to the seams of the shed to screw into for ceiling support.

  • Author

If your garage is attached to your house, you'd better check your local codes. Then go which ever way meets code.

 

its a shed and its in the middle of a lawn.

  • Author

I would use ridgid foil faced sheets and tape the seams. You could add a few strips of wood to the seams of the shed to screw into for ceiling support.

 

why what is the difference between foil and bating?

  • Author

Duck,

 

I think the Duck tape suggestion was meant specifically for you.

 

i wish

  • Author

i might have to go with foam or something thinner since im in a 7x10 shed and batting is thick already.  dont want to shrink my shed to a 4x7

i might have to go with foam or something thinner since im in a 7x10 shed and batting is thick already.  dont want to shrink my shed to a 4x7

Like I suggested , use foil faced rigid foam sheets!

Wear a good dust mask when you working with insulation and protect your eyes.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.