Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Red Oak End Table

Featured Replies

I have never been very successful with a journalistic approach to my projects. I get so caught up in the process that I forget to take some pictures. But, I will give this one a try.

 

First, a bit of background on the project. My grandpa was a full time mechanic after coming back from WWII. He had grown to like the hobby of woodworking. He did a lot of small stuff around the house, looked through catalogs and built neat little craft projects. This included a lot of bandsaw work. He mainly worked with big box pine supplies, as he painted almost everything.

 

I'm not sure when, but he purchased a bunch of nice Red Oak planks. They are stacked in his garage, nicely stickered. The thickness is about 7/8" (already planed) give or take 1/16. They are actually very straight with little warping at all.

 

He passed a little over a year ago. My grandma now has the living room basically to herself, with the exception of my 8 year old cousin and aunt pretty often. She has her recliner in the living room now, with a cheap Target brand fold up TV tray for her remote, glasses, dishes, book, etc. This thing is wobbly, unappealing, and just plain crap. I thought that she should have something nice made for her.

 

I remembered a few tables that Mel here made, and I really liked the design, but with a few alterations. I thought to myself of how nice it would be to build something for my grandma with the wood my grandpa left behind. Best part is, she doesn't know it is being built. I would like to surprise her with it as an early birthday present. Coincidentally, we share the same birthday on December 1st. So it is a present for her to have, and a present for me to (hopefully) see her enjoy the gift.

 

I found my way to the garage and picked out two nice size boards. One is 9" wide and the other is 7" wide. The grain is flat sawn, but I'm not picky.

 

I had to cut the board to rough dimensions, and I don't like doing that on my table saw. It is rickety, and sometimes the board is too long and hits the wall. I used my TS55, and this was great.

 

IMG_1521_zps2aaa769b.jpg

 

The boards were cut, and it was time to prep them in the Marc-method. Joint one face, joint a side, plane to thickness, and fish to whatever width later. But first, I used my hand plan to get any dirt or bits off my pieces. I can sharped my hand plan blade in 5 minutes with a good knick. I don't want to disassemble my jointer blades...all four of them.

 

IMG_1524_zps6c67a506.jpg

 

Once this was done, it was a quick few passes over the jointer and through the planer.

 

IMG_1525_zps63b514dc.jpg

 

Completing cross cuts, and ripping to final width yields my aprons and top (not glued yet, just oriented how I want it).

IMG_1526_zps50e5c4af.jpg

 

And the last bit for today, the top glued up :)

IMG_1527_zpscf974662.jpg

 

I don't have much free time for this build, so I tried to do a lot today.

 

I am going to do the legs later. I need to laminate the wood I have to achieve the thickness. So this means more jointing, planing, gluing, etc. Fun, fun, fun!

 

 

  • Replies 76
  • Views 15.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I have never been very successful with a journalistic approach to my projects. I get so caught up in the process that I forget to take some pictures. But, I will give this one a try.   First, a bit

  • My handwriting may be dainty, but my emotions are tougher than steel!!!!! Only time I cry is when there are gaps in my dovetails.

  • Without getting too sentimental about this, I delivered the table today, and the look of joy in my grandma's face was priceless. But, when I told her it was made from my grandpa's wood, the look in he

Great stuff Sam! I look forward to seeing it progress!

Yayy sam youre doing a journal!!! Looking good so far, keep taking pics.

  • Author

Thank you brethren.

 

Yayy sam youre doing a journal!!! Looking good so far, keep taking pics.

I prefer to call it a diary. Goes along with my girly handwriting - as ERIC says I have.

Yea, maybe private message marc and he can enable a bubbly font for you to use on the forum:)

  • Author

Great start Sam. I really like the motivation for this piece. Nice to see the #4 in action and the fact you can sharpen it extra quick :).

Thanks :) I finally put a dab of wax on the sole of the plane. I don't know what I was doing before wax. That thing slides like an ice skater in a rink.

Anyway, I have to stop by my parents house today. I think my dad has some 4" square red oak. If he does, I'm taking a chunk of it and cutting my legs from that. Seems like a much better option than laminating several pieces.

  • Author

Solid legs would be nice for sure. +1 on wax. I give the sole a little wiggle of candle wax now and again, nice and slippery.

Found a whole box of Gulf Wax for canning. Four blocks, 3"x5"x1"

Found a whole box of Gulf Wax for canning. Four blocks, 3"x5"x1"

That's the same stuff I use. It's like little pieces I magic!

I use the paraffin stick i got from lie nielsen. Works wonders. Also rub my screws on it when i need to use them. Havent had issues with screws since!

  • Author

Trials and tribulations. I feel that is the best way to describe my building process. Allow me to explain :)

 

The top is all glued up, and I was quite a bit excited to get it out of the clamps. I matched up the waving grain quite well, at least to my eye.

 

BCA3F35E-A457-491A-8A4B-8A4B2E2FAE84-495

 

But, what I didn't realize is that I had reversed the grain of the pieces in the process. Not a big deal for relatively straight grained wood, but with the cathedral grain, it is a problem with the hand plane going in the wrong direction. I didn't even think about this until I passed my plane in the wrong direction. Tear. Out. Galore.

 

I gave up hand planing this top because I forgot about the reversing grain twice by the time I hit the middle of the top. Talk about the vulgar language when I just passed over the seam and ripped up the top. Pulled out the ETS150/5 and sanded away. Not a big deal.

 

Second mistake. I told myself to rip the front apron 1/4" heavy to make sure I can get the drawer front from it to keep the matching grain on the front. Now I'm going to have to get down all the aprons about 1/8" to adjust for this :)

 

Third, the 4x4 pieces that my dad said he had were actually maple. So, now, I can either buy a 8/4 piece or laminate a bunch of pieces. I think I might just spend the $15 to have single piece legs.

 

That's enough work for this week. Work this weekend, and exam preparation during the upcoming week.

Sam, thank you for a really honest account. We have all been there. On my bench I was going to allow my outer leg lamination longer to tooth into my aprons, kinda forgot until it was to late!

It happens to all of us  :). Kudos on the grain match and sorry to hear about the tear out. I actually want to have a go with some tear out prone wood to test out the cap iron info recently posted in hand tool village.

Good shout on the legs, spending the money on the right stock is a great idea. Good luck with the exam prep.

Yeah it's par for the course.  Anyone who says they got through an entire build without a mistake or two is lying.  Most mistakes are totally recoverable with a little ingenuity.  Looking good so far, Sam.  I've got a cool idea for you for signing this piece...

 

 

 

k7jt.png

 

I'm just messin'.  You know I love ya buddy. :D 

Yeah it's par for the course.  Anyone who says they got through an entire build without a mistake or two is lying.  Most mistakes are totally recoverable with a little ingenuity.  Looking good so far, Sam.  I've got a cool idea for you for signing this piece...

 

I have played music for many years and was always taught that everyone makes mistakes but, the true art is in recovery.  I believe the same applies to woodworking!

I have played music for many years and was always taught that everyone makes mistakes but, the true art is in recovery. I believe the same applies to woodworking!

On that note, musicians are among the only people that never practice for the mistake.

http://www.silent-fate.com/music.php

 

Listen to the dreamers, I play guitar for these guys. Don't click off, there is a solo in there for you guitar guys :)

 

Great stuff Freddie!  As a studio owner, I could find a lot of things in the mix that I would fix but, the musicianship was spot on!  I'll have to drop you some of my tracks some time to see what you think..

Sounds great Tiods! Don't tell my bass player about the mix, he does all that for us, he would be sad haha

Sounds great Tiods! Don't tell my bass player about the mix, he does all that for us, he would be sad haha

 

He did a good job Freddie!  Nothing to be ashamed of!

 

I've had way too many years in the business so can pick most things apart.  That's actually the curse of being a studio rat, you lose the ability to just enjoy great music.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.