Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Using fabric dye on veneer?

Featured Replies

I'm making a a pick guard for someones electric guitar, i'm using a 4mm birch ply veneered with 0.6mm flamed maple. The guy wants the finish to be a lime green burst, kind of what is in the picture below. I searched for ages trying to find a suitable colour wood dye without success, but my local craft store has a ton of fabric dyes, and it has exactly the colours i need.

 

 

Has anyone tried using a fabric dye on a veneer? i wouldn't opt for this is it was thicker lumber but if anyone has any experience about using it on veneer i would love to hear.

 

post-6992-0-77320100-1381957031_thumb.jp

  • Author

i possibly could could by it from Lockwood....but i'm not in America.... And where i am we have even less choices of wood working supplies than those poor people in Canada...  :(

i possibly could could by it from Lockwood....but i'm not in America.... And where i am we have even less choices of wood working supplies than those poor people in Canada...  :(

Send them an email. You can get it shipped in an envelope if they are willing.

Fabric dye, particularly the 'Rit' brand foundin the USA, shows up in many craft-type web sites as a suitable dye for wood. In fact the Rit web site has instructions for using it to dye wood. That being said, it supposedly is not very colorfast, and will likely fade with exposure to UV light. If fabric dye is all you can find, try it on a test piece, and leave it in direct sunlight for a few days to see how it holds up.

==> supposedly is not very colorfast, and will likely fade with exposure to UV light

 

There are quite a few craft sites on fabric/food-dyes...  There are many threads on using food/clothing dyes for wood over on lumberjocks...  

 

The general uptake is that they are cheap, but not colorfast...  However, the newer fabric dyes are far more color fast then in the past -- in the 'good old days', if you washed one red shirt with one white shirt you got two pink shirts -- not so anymore...

 

However, metal-complex dyes purpose-formulated for woodworking are far more colorfast...

 

I agree with all above, order from Lockwood... They are very service-oriented... I bet they would drop it in the mail to Finland for you...  I have Lockwood's sample-kit...  There is no 'lime-green', but there is a Moss-Green and a Bright-Green that's looking close...  Lockwood has many 'custom' formulations in their archive... If you e-mail them the picture, they might find something very similar...  If you have access to Pantone or some similar matching system, they could probably get you exactly what you want...

 

BTW, found your facebook page -- very cool work...  Also, that idea of using a screw as a router bit is both creative and scary at the same time...

Try it and test it! Measure carefully and document your test solution strengths. This applies to stains, dyes and all sorts of finishing techniques.

If you are in a hurry find a friend with a tanning bed and put your sample in there. If that doesn't make it fade you should be good to go.

Plus think about the life of a guitar , lives in a case and comes out at night to be played! Just warn him not to leave it on display on a stand in front of a window.

Knotscott made a green guitar for his son here is the link maybe he has the source for the dye he used

completedguitar001.jpg

  • Author

Thanks for the replies. I'll buy some of the fabric dye and give it a test, i was planning to do it anyway. i just wanted a heads up to see if it was a complete waste of time or not.

 

 

 

==> 

BTW, found your facebook page -- very cool work...  Also, that idea of using a screw as a router bit is both creative and scary at the same time...

 

 

Thanks for checking out the page! Appreciate it. Yeah the screw thing maybe sound a bit "bodge job" and scary, but i too k the time to make sure it was a safe as using a regular router bit, and i was only routing into soft MDF, not sure i would do it with a harder material. But it worked perfectly!

My grandson uses Rit to make christmas tree ornament on his little lathe. The color lasted for one christmas by the time we unpacked them to use the following year the colors for nearly gone. I have no clue where they went but for some reason they dont stick around.

Personally Ive never tried it but have heard the same from quite a few people.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.