Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Insulating slab floor?

Featured Replies

Getting into a new detached two stall shop. Really excited about laying it out and setting it up for a long duration in the shop. I want to do it right from the get go.

 

My questions, is it worth it to frame and insulate the slab (x"? foam insulation) to help make the space warmer...

 

2x4's flat 16" on center? rigid foam in cavities? Floating? Screwed to concrete? 

 

Tongue and groove plywood? no T&G?

 

 

Thoughts?

 

 

Is there any good videos or tutorials out there?

This has always been a regional discussion that draws upon the expectation of deep frost. If you insulate your floor away from frost free soil, you lose the benefit of the heat that rises. If you are in a northerly climate and you expect much colder soil, the slab is often, but not always, insulated for use under conditioned space.

I live in NC but still did a vapor barrier and insulated the floor.  The vapor barrier will help slow humidity changes from season to season.  I did not want to stand on concrete for hours at a time so I was going to put in a wood floor anyway.  I used 1x3 on flat and 3/4" insulating material in the open spaces.  It has been very comfortable and untill this last summer the humidity has stayed between 40 - 60%.    I use a window AC mounted throught eh wall and a a non vented propane heater.

 

The floor is floating but if I were to do it again, I would level and screw the floor down.

 

BRuce

Vapor barrier ABOVE insulation. Forgot to add that before. Moisture will migrate through the slab and insulation can hold it if you trap the moisture. With the barrier right against the concrete you are simply isolating the slab from ground moisture.

If I were doing the floor the vapor barrier would go on first than the framing because there is going to be condensation hopefully it remains below the framing otherwise mold will grow on the framing lumber and the underside of the floor sheeting. Between the plastic vapor barrier and the slab mold will not have anything to damage. I would attach the sleepers to the concrete floor if it was me I would use a roto-hammer and some split pins to attach instead of a ram set, ram sets cause spalding of the concrete, if you ever need to remove the sleeper floor at some point the split pins will leave the slab with a lot less damage than a ram set.

Hig, I am addressing the OP and insulation below and around the slab where there is a long track record of premature concrete failure if a vapor barrier traps insulation against the slab. I would not put a vapor barrier on top of the slab for the same reason. Water vapor will find it's way in and condense against the barrier above keeping the top of the slab wet for long periods at a time.

I guess we'll just have to disagree. Concrete wicks moisture through it's porous structure that why under most sabs that is going to be any kind of living space the vapor barrier is going under the slab, he doesn't have that luxury if you put the vapor barrier between the sheeting and framing there will be so much moisture and, mold growing on the framing your going to smell the floor rotting also if he heats his shop there will be condensation between the sheeting and, vapor barrier more rot and, mold issues being in construction for 30+ years I have some knowledge on this subject.

To my knowledge, moisture by itself doesnt affect concreete.  Take footings for example or sea walls.  In my case the vapor barrier is on top of the concrete to keep the moisture away from the insulation and wood floor.  which will, as previously said, mold, mildew and rot if the moisture is trapped around it.  My floor was built this way (barrier on concreete) ~15 years ago and I have no smell, no rot and no bugs, "so sayeth the cockOroach man".  :-)

 

As to securing the floor to the concrete, I agree that a power setter or ram set will spault the concrete and if it doesnt set right, you will have to cut that fastener off.  I have drilled and used concrete screws and they appear to work as well as the split anchors.  The floor has to be level or the the 2x4s shimmed to make it level, otherwise every dip in the concrete will telegraph through.

 

I did not use T&G but there is no need not to.  I I were to do it again, I would probably use 5/8 roof shething (water resistant) in one direction and the 3/4" T&G in the other direction so no seams lined up.  Probably overkill but a lot of the equipment is heavy and could sag the floor.

 

BRuce

So the shop is already built? Then best practice is to test the slab for moisture content before determining whether to put a barrier over top of it. You need to account for what may already have wicked into the slab. Hybrid is partially correct that moisture is not the only cause of fault but rather the calcium chloride ground water vapors tend to hold.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.