Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Suggestions for matching a sliver of cherry

Featured Replies

I made some stiles for a chest of drawers and cut one too short. Stupid shooting board. Why are they so fun?

 

I didn't want to make a whole new stile because it would require using a different board and that would screw up the color match on the rest of the stiles. I made a patch to make up the gap (maybe 1/8" - 3/16" thick).

 

No one other than us will probably know but I'd like to try to match the patch as best I can. It's a little lighter than the rest of the adjacent pieces so I think I need to take an artist brush to it. The good news is I haven't glued anything up so I can work on the piece if I want to without worrying about the pieces next to it.

 

Here are my questions finishing gurus:

 

1. What stains, coloring agents, or dyes should I use if any? Will something else work?

2. Should I just leave it? I plan to use shellac to help with blotching on the cherry and then use an oil/varnish blend over the first coat of shellac.

3. Is it better to do this fix now or later on when I do the finishing of the entire piece?

4. Is the artists brush the right technique?

 

Thanks,

Shawn

 

post-90-0-98366600-1383879352_thumb.jpg

post-90-0-83200300-1383879348_thumb.jpg

 

My vote, door #2..  If need be, you can always add some type of tint to the finish coats after the wood has aged (darkened) and has a few sealer coats.  My guess is that it will blend well enough that noone other than you will pick it out.  Woodworking is as much being able to mask mistakes as it is creating the piece :P..  If you look close enough almost any item will have something here or there that is a 'oops'..  IMO that's what makes it genuinely "hand made".. 

Is that repair cherry? Looks like a different wood? Repair with cherry and make sure the face grain is facing front, if it isn't already. You may want to turn the repair to the opposite end. If this is towards the top. The top overhang (shadow line) will help take your eve away from the repair. 

 

 

The dye I made in the link above resembles cherry heartwood color. 

 

-Ace-

Or another idea - is to get another board and re-cut all the drawer dividers thus keeping the wood the same? How many would that be?

 

-Ace-

I’ve been working with a lot of cherry & fixing a lot of chips, blow outs or cut wrong errors the last few years.  I think I’m getting pretty good at it.  Here's what I do.  First step, add a few small drops of Potassium Dichromate into a thimble full of water.  Apply the mixture with an artist brush.  This will will age the new cherry instantly.   Then if there are any “broken” grain lines, I’ fill them in with an artist brush or marker.  Let the grain touch up get very dry before adding a top coat of rubbed in wax.  I’ve also done this with stains and dye but the results are less predictable.    A film top coat of your choice will also work as long as the solvent is different than that of the grain lines.   Most importantly, never, never point it out to anyone else!

Patching can be tricky. Especially when trying to hide a straight edge patch. The eye will naturally pick up on something that doesn't look right.

I'd cut a new piece. But, you may be better at patching :)

Cherry is so reactive to sunlight if the existing pieces were getting hit by light for a few days they may have already darkened and your patch hasn't yet.  So you may just want to let it sit like that, or mask off the rest of the parts and let it sit for an equal amount of time to see what you really have got.  I would make a new piece though.

I'd do something to fill the gaps and make it less obvious.  Otherwise I'd just roll with it and not bother with working too hard at making it match.  You could try an inlay of wood matching your patch piece on the rest of your stiles and call it decorative.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.