Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

This might be a stupid question for all you Festool guys out there.

Featured Replies

Hey guys, I hope this isn't a stupid question, but I have been considering getting a green tool for the first time. Either the big router... or the domino... long term, both.

Okay, I've never used any Festool product, but I see Marc using it in his videos and it always impresses me.
Everyone I see using Festool, always uses it with a Festool dust extractor.

 

What I want to know is will a "standard" shop vac hose fit?

Will a "standard" shop vac work with Festoool, I know it may or may not have the turn on/off feature?
Do you have to get a dust extractor to avoid standing hip deep in chips?

 

Today, I have several routers, and other than the one under the table, the dust collection on them are all some degree of terrible.

 

You can use a standard shop vac.  The challenge is the festool dust ports are metric and and standard shop vac stuff is imperial, but with some creativity and experimentation it will work.  Its just not as easy as it should be.      I think most guys you see on TV or the internet using Festool stuff are sponsored, hence they have the whole nine yards.    Its like when you see a band on stage and they have 45 Marshall stacks in the background and 43 of them aren't even hooked up.  You see these guys with 100 festool boxes (festainers I think they are called) stacked in the background and you wonder if there is anything in them :). 

 

I have the midsize festool router (1400 I think) and I hook it up to a small dewalt shop vac.    The dust collection is probably better than your average router but that comes at a cost.  The little shroud that hooks up to the hose can block your view of the cutter (even though it is clear plastic), so it is kind of hard to see what you are doing.  So unless you are all jigged up and can "fly blind" it can be hard to do plunge cuts, because it is difficult to see where you are plunging.    I had to take it off to cut some dados because, even with a jig and guide rails, I couldn't really see what I was doing.   I probably use the dust collection about 50% of the time.  For cutting edge profiles and things like that it works fine.    

I have used a little portable shop vac on my Domino before. It had about a 1 1/4" hose on it. I was able to get some " o rings" at the hardware store that fit over the vac port on the Domino and they filled the space between the hose and the tool. " O rings come in different diameters and thicknesses, the ones I got were pretty thick in a cross section.

I took the tool and the hose with me and kept trying different sizes. Buy extras ! When you pull the hose off the outermost one can jump off and get lost.

Fein has some good adapters including a tapered adapter you can cut to match your hose or tool. I found one at my local Woodcraft in the Fein display next to the Festool display. At mine, it isn't on a hanger, it's in a locked case :-/  So ask them about it; expect a blank stare :)

The Fein adapter works very well. They don't cost much, so I have two, one for the saw and one for the Domino. For some reason I don't need an adapter for the Rotex 90.

So, as everyone else has noted, with some bodging, you can adapt a Festool tool to use a "standard" (problem is there are about a dozen "standard" sizes) Shop-Vac type hose. A true brand-name Shop-Vac hose will also plug right into a Festool vac.

 

Now, here's the wrenches that are about to be thrown into your works:

 

1) I've never seen a non-ultra-high-end Euro vac that moves air as well as a Festool and this has a BIG impact on how good the overall dust collection is.

2) I've never seen another consumer-available vac period that has full-unit HEPA certified filtration for as cheap as the Festool vacs and, once you have that good of filtration, you'll be horrified at what you used to put up with.

3) Some of the tools (mostly the sanders) really do require the ability to change the amount of static pressure and/or flow and I haven't seen this on a cheaper vac than a Festool

 

 

In other words, about 55% of the reason Festool tools are so good is that they're hooked to Festool vacs. When I bought in to the system a couple of years ago, I was really resistant to spending the money to buy the vac too. I thought all the people raving about the vac were nuts! To my great surprise, the vacs are probably the part of the system I'm most impressed with. We use the CT-MIDI to vacuum the house now too since it's so much better than a normal house vac.

==> Drink the Koolaid and get the Extractor-tool combo, you'll love it.

 

That's Drink the Green Kool-Aid....

 

==> Some of the tools (mostly the sanders) really do require the ability to change the amount of static pressure and/or flow and I haven't seen this on a cheaper vac than a Festool

 

This is very useful for finish sanding... 

 

 

I happen to have the green machine, but the Mirka and Fein units are also very good...

I happen to have the green machine, but the Mirka and Fein units are also very good...

There's another brand to add to that list that are dead ringers for the Festool vacs who's name I can't remember. Sadly, all of them are in the same price class as the Festool vacs but you don't get the slight discount for buying the vac and tool together.

  • 3 weeks later...

I bought one of these Bosch hoses:

http://www.amazon.com/Bosch-VAC005-5-Meter-Vacuum-Hose/dp/B0000AV78B

 

As one amazon reviewer commented, the small end is mis-pictured.  It actually has a semi-flexible rubber end that fits not only on most of my Bosch tools (with a little stretching in a few cases), but also fits quite well (inside) my brandnew Festool tracksaw dust port.

 

I suppose i really should buy the Festool vacumn, and probably will eventually, but i already have a perfectly good ShopVac, so i can't justify a new vacumn until this one burns out.

Hi Chet. I own a few Festool machines but not the vac as yet, however, I do have the festool hoses. They plug straight into my blast gates but I did the whole thing a little differently.

I have 2.5 inch pvc pipe running to each area that I require high pressure, low volume. At one end of the PVC is the shop vac with a dust deputy cyclone. At the other ends, there are 2.5 inch to 2 inch plastic blast gates. The festool 36mm hose fitting pushes beautifully into the inside of the 2 inch section of the blast gate and so it is that most of my festool hoses have 36mm festool rotating collars. Protool has a slip in reducer that reduces me down to 27mm for when I use a festool sander.

Oh, by the way, My shop vac is a suck and also blow unit so the air exhausted goes through another 2 inch pipe about 2 feet long straight out the wall in my shop. I never even smell sawdust any more since I did this conversion. The dust deputy is SO good that I have even removed the filters from the shop vac.

I have a 1400 router and the Rotex 90.   I purchased one of these Bosch Hoses, supposed to similar to the Festool Hose.  It is a much higher quality than the standard shop vac hoses.  Not sure how it would hook up to the shopvac though, as I have a Dust Deputy before my vac.  

 

The bosch hose hooks right up to the router, but I had to rig up some smaller hose for the Sander.  

 

I am very happy with the setup, works great.  You won't be disappointed with your choice to drink the Green Kool-aid.  They are just fun tools to use!!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.