Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

milling lumber in the cold

Featured Replies

are there any adverse effects or things to consider when milling lumber in 30 degree (F) weather?

Would the wood not move later on? I would expect 30 degree weather to also be low humidity.

Like Steve alluded to...wood responds to moisture, not so much temperature.

 

 

Would the wood not move later on? I would expect 30 degree weather to also be low humidity.

 

 

There will always be swings in humidity regardless of when you mill...it's the same but opposite scenario when you work in hot and muggy August.  As long as you are milling properly (i.e. same amount off both sides, and in two or three sessions to final dimension), you sticker and stack while your parts sit (not too long!), you cut your joinery and assemble in a reasonable time-frame, and follow wood movement rules in your design, you'll be fine.  If you mill your boards down to final dimension and leave them stacked and stickered for months...yeah you'll probably have some trouble.  But that's true for any month out of the year.

 

My biggest woodworking concern when it's cold is keeping my coffee hot...I gotta run back in the kitchen every ten minutes for a nuke.  That, and cold machines.  I'll usually turn the heaters on in the shop as soon as I wake up, so by the time my brain is functioning properly and I'm ready to work, it's at least 50 degrees and the belts aren't frozen and rigid.  Other than that, I love winter woodworking...no beads of sweat dripping on my cast iron! :)  There's nothing like summer in St. Louis to make me wanna NOT go in the shop.  Window A/C unit is at the top of my shop upgrades list.

There may not be beads of sweat falling on my nice cast iron tops, but I'm finding a lot of condensation running out of my respirator instead.

there is a risk of shrinkage.... but ask George Costanza.... its temporary.

As far as I know, temperature and relative humidity go hand in hand to determine the overall moisture content in wood.

http://www.woodworkerssource.com/moisture.php

For the most part your shop should be the same temp for building, milling and finishing within reason. It doesn't have to be perfectly 70 but no extremes.

Depending on which species, there are several woods that are best cut in winter.  Some are near impossible (holly) to do otherwise to get reasonable yield

Depending on which species, there are several woods that are best cut in winter.  Some are near impossible (holly) to do otherwise to get reasonable yield

 

Huh?

Huh?

 

I think he is talking about sawing logs into rough lumber.  For example, the mill I buy from only saws black locust logs into boards during the winter.  The guy who runs the mill told me you do it in the summer the boards twist and check like crazy. 

Holly must be cut and milled in the winter to prevent blue staining from fungus I guess. It needs to be kept clean ( no dirt ) and be partially dry before the spring.

I have some sections from a huge holly bush I cut down and all the wood is bluish gray because I did not know this and cut it in the spring. I have another one that may have to come down and it will be done in mid winter ! It is very hard on a chainsaw .

Huh?

 

Woodsap and wdwerker pretty much answered it.   Holly has to go all the way through rough milling quickly from a winter cut to be anything but a waste of time. Black locust is best taken through rough milling in winter, and yields are better for honey locust as well.  I have also generally find I get more usable lumber and fewer headaches with hophornbeam.

Ah, I see.  Guess I was confused because OP was asking about milling dried stock in the shop, not about harvesting lumber from the earth.  Interesting nugget, though...if I ever find some holly to cut down I'll be sure to wait until winter. :)

Ah, I see.  Guess I was confused because OP was asking about milling dried stock in the shop, not about harvesting lumber from the earth.  Interesting nugget, though...if I ever find some holly to cut down I'll be sure to wait until winter. :)

 

I probably should have been more expansive - I was making the point that milling to final dimensions really should be fine in any reasonable temperature range, given that most of the real problems one might encounter (release of tension, etc.) are sometimes better in colder conditions.    However, as you say, for dried stock I doubt it makes an observable difference for any species.

 

Having milled both dried lumber and 'harvest' wood in 20's weather, I can attest the wood is not the main thing I was worried about in the cold.

there is a risk of shrinkage.... but ask George Costanza.... its temporary.

George knows things....and there may be some shrinkage in the winter (with the boards!!) but it's negligible. The enemy is moisture.  That's why some lumber is harvested in winter.  Sap is down so there's not as much moisture in it from the beginning.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.