Recommended Posts

Posted

Hey there!

I love my oscillating sander! Yep, sure do! ;)

I was thinking if there was a way to have a buffing/polishing type of sleeve I could use I'd love to buy it! Specifically 3/4" and larger ones.

So, does this exist?

Is there a good way make one?

And, is this just a silly idea? :)

Posted

==> I love my oscillating sander!

==> buffing/polishing type of sleeve

 

 

Oscillating Spindle Sander?

 

Interesting idea...  RPM may be too low for effective buffing...  Or more precisely, SFM may be to low... But interesting idea none the less...

 

I suppose it depends on what you want to buff...

 

If I remember correctly, softer metals require 3000-5000sfm, harder metals 5000-7000sfm

 

Obviously hard film finishes would be lower to prevent heat build-up. I bet turners would know effective sfm for wood/finishes/etc

Posted

I'm looking for a better way to buff my reindeer :)

Right now, I do it all by hand. I wax them and use those buffing pads to get a low sheen. My thought with the spindle sander was, I'd get a more even finish. And possible a higher shine.

Posted

==> I'm looking for a better way to buff my reindeer  :) 

 

KA makes a really small sanding/buffing head for their kit...  Probably still too big for the reindeer...

 

For the nooks-and-crannies, there's always Dremel...

Posted

Looks like a nice kit! I'll have to do more research to see if there is something better for my needs. I do have a dremel, perhaps that's the best option, at least for now.

Posted

They make a ball shaped abrasive pads that are made up of round pointed star shaped cut sections on an arbor shaft. You can chuck it in a drill press or a drill. The white pads are pretty good at buffing a satin sheen.

I have 3 air drills that I use in succession ,red, gray then white.

  • Like 1
Posted

==> soft paint roller

 

There's an idea --

 

I've got some of those 'large-diameter' Purdy 1 &3/4" extra soft lambskin paint rollers in the shop somewhere...

 

I've never used them myself, but when we spruce-up our building, the contractors use rollers that have to be 3-4 inches in diameter...  That would increase SFM nicely...

 

I'll find something to shoot lacquer on and see how it works.  Thanks...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 45 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined