G S Haydon Posted December 9, 2013 Report Posted December 9, 2013 Just to save me too much time experimenting on alternative methods what would you guys do to polish up the back and saw plate on one of these http://www.spear-and-jackson.com/produc ... tenon-saws? They are quite rough a feel like they will need some reasonable elbow grease. Note: I respect the fact this may not be essential and may be viewed as a waste of time by some, that said I do want to improve the feel and look of the tool to suit my needs. Thanks in advance! Quote
Dan S Posted December 9, 2013 Report Posted December 9, 2013 wheel polish if it's not to bad, otherwise start with wet/dry sandpaper.http://www.mothers.com/02_products/05148.html Quote
Trip Posted December 9, 2013 Report Posted December 9, 2013 There's some articles on cleaning/polishing over on Vintage Saws... http://www.vintagesaws.com/library/saw_clean/saw_clean.html Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.