TheFatBaron Posted December 20, 2013 Report Posted December 20, 2013 http://www.amazon.com/gp/product/B00006JKXE/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B00006JKXE&linkCode=as2&tag=thewoodwhispe-20 Marc shared this out on Facebook. I know Dewalt gets poo-poo'd quite a bet (deservedly so in many cases), but damn - that is a good deal. It seems comparable to the Bosch 1617, spec-wise. Thought? Quote
Trip Posted December 20, 2013 Report Posted December 20, 2013 From the specs, it looks like a good deal -- maybe a bit too good... It's a bit hard for me to believe you can get a 2 1/4 HP router with fixed and plunge base for $150... I'm not saying it defies the Laws of Physics, it's just it's just that the price point is much lower than I'd expect for those specs... If this is a model close-out, inventory overstock clearance, etc -- then fine... I don't track DeWalt pricing, so can't really say is this is the normal street price or something special. With any tool, I always recommend you try it before plunking-down your hard-earned $$. If you're near a Woodcraft, or something similar, take it for a test drive... One thing, it's shipped/sold by Amazon. They are really good about returns, so maybe there's not much risk... Quote
Rick LoDico Posted December 20, 2013 Report Posted December 20, 2013 That's about what I paid for mine with the two bases a couple of years ago. It's an excellent router. Quote
Dan S Posted December 20, 2013 Report Posted December 20, 2013 If it's anything like the DWP611PK in design/construction it's well worth it. Quote
Jfitz Posted December 20, 2013 Report Posted December 20, 2013 I have had the 618 kit for a few years, and it seems to be a very good router - at least for me. The dust collection on the plunge base is nice, and the detachable cord is a nice feature. I know the early units seemed to have a problem with dust getting into the switch but I have not had that issue. I use mine both in the bases (fixed and plunge) and also in a table (using the PRLv2 lift). I recently wanted a second router and picked up just the fixed base version for that price....so getting the plunge base too for the same price is a nice bonus. Quote
Byrdie Posted December 22, 2013 Report Posted December 22, 2013 That looks almost exactly like the router combo I just picked up, including the plastic carry case ... except mine is a Master Force (Mendard's house brand) and the whole kit was $120. The Master Force is 2HP and green where the Dewalt is yellow. Instead of the threaded motor housing it uses a clamping system. It is variable speed. It also comes with an edge guide and the case is grey. I got mine because my other "good" router is a PC 690. I got the 3/8" rabbeting bit to use on the WFC easel build and it didn't fit through the opening in the base of the PC. I didn't want to alter/damage the PC base because it works with a collet guide system for the dovetail jig I have. I went looking for an aftermarket add on base I'd seen and the store was out of them but they had this plunge - fixed base combo for the reasonable price. Bigger opening in the base ... problem solved! Think I've drunk the KoolAid ... I'm up to 3 routers now and my first plunge base. Quote
Barron Posted December 22, 2013 Report Posted December 22, 2013 I have this kit and really like it. My only complaint is the case is huge! I have several different Dewalt tools and like them all. Quote
TheFatBaron Posted December 23, 2013 Author Report Posted December 23, 2013 I guess it was one of their time-sensitive things. It's back up to $200, which is more in line with the P-C and Bosch offerings. Darn me and my hesitation. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.