jdbrown1998 Posted January 18, 2014 Report Posted January 18, 2014 Hello, I recently bought a #4 Great Neck Plane with light surface rust for $10. I was wondering if: 1) Anyone knows anything about this company (are they good planes) 2) Does the following plan sound good for getting it ready to use? a) Check the base for flatness and if not flatten it Check back of cutting blade for flatness and then flatten it c) Sharpen blade I normally use the scary sharp method of sharpening. This is my first plane purchase beyond a Stanely Block Plane from a big box store. Thanks for your help and any information that you can provide. -Joe Quote
Byrdie Posted January 18, 2014 Report Posted January 18, 2014 Don't remember much about the Great Neck brand. Seems to me it fell in the budget category but truly no plane is better than the care that is taken of it and the hands of the master that uses it. Your plan for tuning it up sounds good and in the proper sequence. Lap the sole if necessary, flatten and sharpen the iron, maybe clean up the worst of the rust on the body and then make some shavings. Quote
Tpt life Posted January 18, 2014 Report Posted January 18, 2014 From images they look like Bailey clones. What I cannot find is a good look at the frog. Based on poor pics and the price point it appears to be a stamped rather than cast frog. This makes the plane less substantial in the way the iron mounts and some people nay say it. That said, if you already have it give it a spin. Worst case you won't like it in dense woods. Quote
G S Haydon Posted January 18, 2014 Report Posted January 18, 2014 Looks like a decent Bailey clone, like c says, could be a stamped frog although from the pic I'm 65% sure it's cast. Should do you fine as a first tool or even for the rest of depending how good it turns out to be. Quote
TerryMcK Posted January 18, 2014 Report Posted January 18, 2014 GreatNeck are still around and they currently make tools at the budget end of the range. Looking at the picture it looks to me as though it is cast. Take it apart and look at the junction between frog and sole. Post some more pictures. It may be a good buy. Update I found one on Ebay Australia here The frog definitely looks to be cast on the pictures shown on the eBay listing. It went for 58 AUS$ - not sure of the exchange rate to US or UK. Quote
jdbrown1998 Posted January 19, 2014 Author Report Posted January 19, 2014 Thanks all for the advice and confirmation. I am primarily a power tool type but I am glad to be adding in a few hand tools and this looks like it could be a nice addition to my work. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.