Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood filler

Featured Replies

Wondering how you guys fill nail holes and such when using stain. I can never seem to (hide the filler)

Sent from my iPhone using Tapatalk

How big a nail? 21g pins almost self heal. 18g can fill with a touch of glue and sanding dust. Some are best shot after finishing and so they make wax sticks to fill after stain. The trick is to be super patient when mixing colors to get exactly the tone you want. I would not rely on a "stainable" filler. They are a marketing scam in my opinion.

There shouldn't be any nail holes in your projects :) but if you find yourself in need, Timbermate is good.  I just used some stuff called Famowood that I got from Rockler to fill a couple tiny wormholes and it was decent.  They almost always "supposedly" take stain, but I find that they never take stain the same way the wood takes stain, so they're still visible, which is why there shouldn't be any nail holes in your projects. :)

  • Author

The problem is there are screw holes. It's an old toolbox my father built and I was trying to put a nice finish on it.

Ah yes, different conversation all together. I would back the screws out one at a time, drill for plugs, reinstall the screws and then plug appropriately.

You a can also use wax sticks after the fact for small repairs, but de certainly not screw holes!

  • Author

I'm not familiar with plugs kind of a newbie here I was wanting to reassemble without using any screws is my goal but don't really know how to make it look good

Just buy or make some 3/8" dowel, drill 3/8" holes, shove in the dowel with some glue, trim flush, sand, finish, done.

 

abhenxmas2012123.jpg

Google them. They are wood cylinders (think short dowels) you glue in place to hide the screw. If you get plugs that are the same specie and orient similar grain properly you can achieve some amazing things. You can buy a plug cutter, rather than plugs themselves ,and cut your own plugs.

Lee valley has a great plug kit. The diameter of the drill/ counter matches the plug ( which is tapered for a perfect fit). Pretty inexpensive too.

http://www.leevalley.com/en/wood/page.aspx?p=32320&cat=1,180,42288

I have found that dowel stock rarely is it's stated dimension, and does not consistently fit in the drilled hole very well. Of course, you could always make your own dowel stock with a fancy dowel plate.

The drawback to dowels is that they're end grain and really stick out in the finish.  If this is the look you're going for, perfect!

 

If you wish to attempt to hide them, then the plug cutters are the way to go as you can get your plugs from the face grain.

 

Both are good for capping screw holes and take stain and finish much better than filler.

 

Just cut them a little long and flush trim them when the glue dries.

 

Good luck!

I agree with all the plug comments . If you need to use filler do a test run ! Fill holes in a scrap from that project with every color filler you have, let it dry, sand it flush , stain and pick which color filler to use. You might end up using oak filler on maple if you are going to stain it a medium brown.

Buy an assortment of filler colors and mix your own if the results really matter. It is not that hard, just takes a bit of testing and planning .

Add stain to shellac, light it on fire burn off the solvent and fill your holes

Wait...what?

Shellac sticks work as well or better than any filler I've tried, just get them in the desired finish color. I was taught to light them on fire and drip into the hole but that sometimes darkens the color, a hot knife works better. Never tried or heard of PB's method. For small holes ... wood dust and CA glue works well but only if you are using a film finish as the CA will stick out like a sore thumb with oil. Sometimes I use a contrasting wood color and just accentuate the holes rather than try to hide them. Epoxy colored black with food coloring or dye will blend into any dark finish.

Wait...what?

Mix shellac in a tin can like a tuna can with the right color stain. Set it in the yard and let it burn. It will turn to a paste, fill holes with knife and sand smooth. Stain the piece the stained shellac will blend then topcoat.

Use for grain filler also.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.