Janello Posted March 2, 2014 Report Posted March 2, 2014 Theres a local guy selling a Rockwell 10" contractors table saw, model 62-042. Not sure how old it is, but it's older style with a CI top and aluminum wings. It appears to be in very good condition. How do these saws perform and is it worth jumping to this from a newer DeWalt contractors saw or holding off until I can afford a higher HP cabinet saw after my shop gets built in the spring? Quote
..Kev Posted March 3, 2014 Report Posted March 3, 2014 Just my 2 cents worth.. I don't know anything about the Rockwell but, if you're building a new shop in the spring (a month away) wouldn't it be nice to put in the saw that you really want? Only you can decide if you can afford the saw you really want. I know others will chime in about the saw you're looking at. Good luck! And "Congrats" on the new shop! Quote
JerrySats Posted March 3, 2014 Report Posted March 3, 2014 I think it depends on the price , I have one in my shop but its a second saw not my mine one . It does a fine job but it has limits , don't expect it to rip through 8/4 hardwoods with ease . How much is he asking for it ? Quote
Janello Posted March 3, 2014 Author Report Posted March 3, 2014 He's asking $300. but while talking with him on the phone he seemed desperate to get rid of it...as in it's going on craigslist for best offer. I have a feeling I can get him down to $150 without much resistance. The saw was used for making formica tops so he has some form of a slide attachment and large out feed table that go with it. It's been sitting about 3 years and can use a good cleaning but he said everything works well. I really would love to have a powermatic or saw stop in the new shop but my next big purchase will be a jointer so that's down the road a bit. Just thinking this saw would hold me over a year or two. I guess the big question is...what advantage if any will it give me over the DeWalt I currently use? Quote
Tpt life Posted March 3, 2014 Report Posted March 3, 2014 Listen to it run. My Rockwell does ok but I likely would not sell a newer DeWalt just to tide me over for a year or two. I assume your DeWalt is direct drive with exaggerated HP claims. Toe to toe the Rockwell will stay truer to labeled HP but if you are just hobbying, I doubt you would notice a big difference. My big issue with my Rockwell is that it is pre-splitter of any kind. Any newer DeWalt should have better factory integrated safety devices. Quote
Janello Posted March 3, 2014 Author Report Posted March 3, 2014 Just called him back to clear a few things up. It doesn't have a slide table... he has a slide miter saw for sale too. Guy talks fast! He does have out feed/side table and the longer 6' fence bars along with the 4' stock bars that go with it though. Quote
sjeff70 Posted March 3, 2014 Report Posted March 3, 2014 A bird in the hand... I've always been a waiter and a saver so it's easy for me to say this. If it were more of an upgrade I'd be more willing to buy it. I would try to find a used cabinet saw which would add more value. If anything the wait (while searching for one) would bring you closer to what you really want. Who knows you might find one quickly. Older, used Rockwells come up all the time. Quote
Janello Posted March 8, 2014 Author Report Posted March 8, 2014 Thanks guys. I passed as i knew i probably would unless someone here raved about the saw. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.