Recommended Posts

Posted

I am finally looking into upgrading from my shop vac to a dust collection system, however I am running into some questions in regards to the voltage ratings of some systems...right now I have my eye on http://www.grizzly.com/products/2-HP-Dust-Collector-with-Aluminum-Impeller-Polar-Bear-Series/G1029Z2P but in the Electrical it says it is rated 240V Single Phase, while other ones say 240V but they also say 220V, I just had my shop wired up with a 220V outlet, that looks like this, would this work with that dust collector?  If not what exactly am I looking for?

 

220outlet.jpg

Posted

I'm going to assume the 220v comes from voltage drop over the length of the wire.

Should be 240v, but over the length of the wire it may drop to 220v, but still work just fine. Again, assuming here.

Posted

There are ranges that utilities must hit in supply that vary. In some places you find 110/220 and in others 120/240. Your equipment should easily operate within and slightly outside that spectrum.

Posted

That's a NEMA 6-20 outlet in your photo. So as long as the DC 20a or lower, you should be fine...

 

One observation, some inspectors interpret DCs as constant load -- it's not quite NEC (the amperage falls below the cut-off), but it's not quite wrong either -- it's one of those gray areas subject to interpretation... So the inspector may require the DC to be on it's own -- which means he'll make you get rid of the second receptacle -- it's picky, but that's your hard-earned tax dollars at work... I've only had one inspector check, and of course, I got busted...  I've wired DC as a dedicated line ever since... 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined