anotherron Posted March 17, 2014 Report Posted March 17, 2014 I have an older Jet JSG-6 sander. The disk sander has an oval connection (2-1/4" X 6") under the disk for dust colection. Delta's older disk sanders appear to use the same type of connector. My problem is that I cannot find nor know how to make an adaptor that wil connect to the machine and to my 4" dust collection system. Does anyone have a similar problem machine, and how did you solve the problem? Thanks in advance for any help. Quote
wtnhighlander Posted March 17, 2014 Report Posted March 17, 2014 The MacGuyver solution I would probably pursue involves flexible plastic sheeting cut from a Rubbermaid trash can, and a roll of duct tape.... 1 Quote
Dave H Posted March 17, 2014 Report Posted March 17, 2014 Yes I agree with wtnhighlander and, once you've made the adapter box add one of these to it . 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.