Recommended Posts

Posted

This morning I was out in my shop working on a new medicine cabinet for our bathroom remodel and needed to edge joint some boards. Started in on them with my Ryobi bench top jointer and as usual the final pass on one of the boards and it tipped and and screwed it up. I decided that I was finally going to pull the trigger on the new Grizzly that I have been dreaming about. Went in the house, got on the internet, added the G0452P to my cart and filled out all the info and after a little second guessing my purchase I hit the submit order button. Waited and waited and never got the any response. Called Grizzly and was informed that on Saturday there is no way to verify if the order was actually submitted. Never got an email confirmation so I am assuming it didn't go through. CRAP!!!! I'm going to call in on Monday morning.

 I know that this jointer isn't up to the standards of a lot pf you guys, but for me this will a giant step up and I can't wait. I have been getting by with the bench top for a long time and this will be a dream come true, :D

 

Posted

Enjoy the new joiner!  Like Sam said it's a "step up" from your Ryobi.

 

That is normal for Grizzly, I called about a parts return on a Friday late afternoon and they said  "our Email dept. has gone home for the weekend, you will not get a reply till Monday"  You would think that email would work 24/7 but not at Grizzly.  :lol:

 

I sure it will all be fine on Monday.

Posted

Called Grizzly this morning as I suspected my order hadn't gone through, but it has NOW!!!! Should be Thursday or Friday.

Make sure to take pictures and let us know what you think of it :)

Posted

I received my new G0452P on Thursday. Couldn't believe it, but the trucking company called Tuesday and wanted to know if they could make the delivery! I ordered it on Monday.  :o Couldn't sneak away from work until Thursday. It came via Saia Freight and the BS about the driver not helping unload is not true. He even helped me open the boxes and inspect for damage,

 Now about the machine. Got it put together yesterday. The manual was straight forward and easy to follow. Even had a chart with full size drawings of all the hardware. Good thing as I'm a metric resistor and not very familiar with sizes.Everything went together well. Checked all the alignment and everything was right on. Did have to square the fence but that's all. One thing if you are planning on ordering something like this is to have a roll of paper towels and a can of mineral spirits around to wipe all the protective goop off. The paint job leaves a little to be desired but I'm more interested in performance than appearance.

 As far as performance I couldn't be happier. I can't get over how quiet it is compared to my Ryobi bench top. There's no vibration and it leaves a velvet smooth finish on the oak and walnut boards that I tested on. Heck the two push blocks that came with it even work better than any of the ones I've got. The built in mobile base works really well and will be very handy. It came with a knife setting jig. I'd have to say I am very satisfied with my purchase so far and can't wait to start a real project and put it to the test. :D  

  • Like 1
Posted

==>BS about the driver not helping unload is not true

It's all down to the individual... Drivers are just like anyone else... Some will be very helpful and some wont... I've always had accommodating delivery guys -- maybe some of them were a bit incompetent, but generally very nice about it...

 

Had a couple thousand lbs of hardwood delivered today... The freight line has a rule about curb-side delivery only -- no exceptions... He pulled-up with a tractor with short trailer (32') -- which is the max I've ever seen get up my driveway... The trucker took one look at the length of my driveway and figured just how many trips with my pickup it would take --- and said he'd be happy to back right up to my wood shed --- as long as I didn't tell anyone... He then spent 45 minutes helping me unload and stack the lumber... Nice guy...

Posted

I've married into a family of truckers.  Most of them don't mind helping you unload as long as you help.  Some have union contracts, some don't.  If they have a union that they like, and is good with them, you're more likely to find them helping.  If the union is ... shall we say, "particular," ... you might have to do the work yourself.  Sometimes the trucker can justify the assistance by saying the time they lose sitting still while waiting for you to unload the freight is more than the time lost by assisting you, which gets them back on their deliveries faster, saving the company money.

 

And yes, I would hang out with these guys after work hours, even if I wasn't family now.

 

Glad to hear you've had a pleasant surprise, and great experience!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 59 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined