wouldwurker Posted May 7, 2014 Report Posted May 7, 2014 Ambrosia Maple and Walnut. Pop top. The muscle memory is beginning to kick in on the pop-top box making. This is the first time I didn't use a router. Did all my bevels, chamfers, dados, and rabbits on the table saw. Snuck up on all the fits. I also tried 1/4" mitre keys for the first time. The 'chunky' mitre key look happens to work on this box, as the ambrosia maple has more of a beachy look than elegance per se, but I don't think I'll do it again. It's tough to get the right fit (lots of hammer smacking before fitting) and a bear on my flush trim saw once glued in. Also the first time I simply used Danish Oil and some renaissance wax, in lieu of Arm R Seal. Nice to add the finish in one night...instead of 3 weeks. Maple is some darn tough wood. I dropped the box 3 times on my cement floor and nary a scratch. I still struggle with easing the edges, without losing the visual 'sharpness' of them. Could use some pointers there. Also, you'll note how the sides have a 'squeezed' look, from the tops and bottoms curving in. I think this is a result of my random orbital sander (and user error)? Quote
Coop Posted May 7, 2014 Report Posted May 7, 2014 I like the wood combinations. Good job! I usually hand sand using 220 paper to soften the edges. Quote
wtnhighlander Posted May 9, 2014 Report Posted May 9, 2014 You can try making a faceted edge by taking a light pass with a block plane on each edge. That will break the splinter-prone corners of the wood, but not leave a 'fuzzy' soft edge. Should help keep it looking crisp. Quote
..Kev Posted May 9, 2014 Report Posted May 9, 2014 Very nice gift! I usually hand sand with 180 to soften the edges a bit.. Quote
woodieboy Posted May 13, 2014 Report Posted May 13, 2014 That needs few more sanding but it still looks great. You out did yourself! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.