Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop Change 4.0/Downsize

Featured Replies

I am going through another shop change. Not sure if this is my fourth or fifth shop change in the last five years. Let's just call it 4.0. The shop change is really more of a downsizing. The problem with not having a dedicated shop is that there are times in our lives where other stuff takes priority. Our house in only three bedrooms and for the last 3 years our third bedroom has been a catch all for a bunch of extra stuff. We are getting to the point where we are going to to need that third bedroom and some of the stuff in it has to be stored in the garage. It makes zero sense to pay for a storage unit when we have a garage perfectly suited for storing stuff that cannot be stored in the house. I realized it was time for me to stop being so selfish and give back some of the garage and get rid of tools that I did not need.

 

I thought long and hard about what tools should go and what direction my woodworking is heading.  At the end of the day it was a good amount of my Festool's that ended up going. I knew that the Festool stuff had the best resale value and a lot of the stuff I got almost what I paid for it. It also gave me some extra cash which is always a plus but it will not be put back into the shop. It also freed up a bit of space in my shop. I also gave away a bench that I had sitting in my shop that took up a lot of space and was kind of a piece of junk.

 

This left me with a table saw, band saw, jointer, planer, a bunch of hand tools, sharpening bench, joinery bench, and a make shift out-feed table. I am getting ready to build a dutch tool chest and anything that does not fit in the dutch tool chest or the joinery bench will probably go. Also on the short list is a craftsman tool box (biggest POS I have bought) and a shop vac attached to a Rockler Dust Right Vortex. The shop vac and Dust Right take up a ton of space and are kind of PITA to move around the shop. A broom and dust pan will work out just fine. I am on the fence about an out feed table. I plan on building an English Workbench and I might just end up putting that behind my table saw and using it as an out feed table.

It was hard to see some of the tools go but after I did a bit of rearranging it actually felt a little liberating not having so much stuff in the garage and it made me realize that I was way too far down the Festool rabbit hole.

post-104-0-92940700-1399953146_thumb.jpg

post-104-0-08350600-1399953148_thumb.jpg

post-104-0-13655300-1399953149_thumb.jpg

post-104-0-26053600-1399953150_thumb.jpg

post-104-0-36200100-1399953151_thumb.jpg

Goes without saying that the family has to take priority.  Glad to hear you're still going to be woodworking!

  • Author

Goes without saying that the family has to take priority.  Glad to hear you're still going to be woodworking!

Oh yea, still woodworking just on a smaller scale. I still have all the big machines and plenty of hand tools. 

  • Author

It looks like you still have a good selection of tools James.

I still have a very good selection of tools. I know a lot of woodworkers who would be very happy with the set of tooling I have. 

James, where are you getting your plans for the bench?

We each have our priorities sad to give up so much but that does not mean you can't make some nice Iteams. I'm hoping that in a year or so I can expand.

  • Author

James, where are you getting your plans for the bench?

I am not going to use any specific plans. I am just going off of pictures of what I have seen others build, so mostly just winging it  :P. To be more specific, I plan on using 2x12x12 stock from Home Depot. The joinery for the base will probably be through M & T joints, I might even try my hand at wedges. Some cross members to support the top and I will end up using two separate pieces to make a split top with a tool insert in the middle. Nothing is concrete, this is more just me spitballing some ideas. 

The first thing I did when I got down to putting together a serious shop was build a shed in the backyard.  It's small...only 8x10...but it's stuffed full of crap that I refuse to keep in my shop, which works out great.  It was totally, totally worth it to spend the time and money building the shed.  The only things in my shop that aren't woodworking related are two small recycling trash cans for paper and plastic, and a few brooms, etc hanging right by the kitchen door.  And those things get on my nerves to no end but there's nothing I can do about it...there's no other logical place to put them and my wife would have a conniption fit if I moved them.  I even keep most of my construction tools in the shed.  If I don't use something regularly for woodworking, it doesn't belong in my shop.  I'm pretty OCD but I think it's reasonable to want to make the most of your limited space.

 

I also built a bunch of shelving units in the back room of the basement.  Organization goes a long way...you'd be surprised just how much worthless junk you can store in a small area if it's neatly packed away.  It's a constant struggle around here to get rid of the crap we never use...my wife tends to hoard anything she thinks is worth more than a dollar, and I'll throw away just about anything if we don't use it.  With two little kids, the garbage piles up fast.  I keep hearing about this epic garage sale in our future, but it never seems to happen.  Our collection of worthless crap continues to grow.  But the wife has been trained to understand that NONE of that crap EVER goes in my shop.  That's my happy place, my temple, the only area of the house that stays neat and organized...because I'm the only one allowed to use it.

I am not going to use any specific plans. I am just going off of pictures of what I have seen others build, so mostly just winging it  :P. To be more specific, I plan on using 2x12x12 stock from Home Depot. The joinery for the base will probably be through M & T joints, I might even try my hand at wedges. Some cross members to support the top and I will end up using two separate pieces to make a split top with a tool insert in the middle. Nothing is concrete, this is more just me spitballing some ideas. 

I am just wrapping up a 5 month long project "crafts building" for my wife. It was build it or share my shop w/ her :( . So, my next build will be a long needed work bench and I'm trying to get ideas. I'm thinking of one, due to lack of space, of about 4' x 3' and I would like for it to be mobile but yet heavy and sturdy. That in itself is probably an oxymoron!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.