Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Drying Oily Rags

Featured Replies

I am getting ready to use some BLO for the first time but am little unsure on how I should properly dry the used oily rags. I don't really have good spot on my driveway to let them dry nor do I have a clothes line to hang them on. I was just thinking  I could put my weber in the middle of the yard and let the rags dry on the grill. If by chance they did combust they would just burn off in the grill. Any thoughts or other suggestions would be great.

I drape them over the edge of my garbage can until dry.  I've never had any issues.

Some times I just spread them out on the shop floor.  No folds perfectly flat.  With the doors open they dry out pretty good over night

I'm going to say no to the grill idea.  I don't think I would want leftover finish directly on the surface where I would be cooking food, or even in the same 'oven' in case nasties are released when it is burned.  BLO may be okay, but you might have other finishes that won't be so you will want a routine that works for any finish. 

 

If you are limited for space, how about running a line and hanging them with clothespins like on a clothesline?  I personally have only one or two at a time and I just lay them out flat to dry.  Or I hang them over the side of the trash can outside without the lid.

It really does not matter where as long as you don't fold or bunch. If laying flat were a concern then we would have our projects occasionally igniting. You just want a way for the heat to escape.

Heat removal & ventilation is the key, James. The oil creates heat as it cures, and it is also somewhat combustible. Spreading the rags out to dissipate heat over the largest surface area will prevent any spots from collecting enough heat to ignite. You can drpe them over a trash can edge, or over a scrap board. As long as they arent folded or otherwise layered together, they won't be able to get anywhere near ignition temperature.

  • Author

Thank you everyone for all the help. I will just find somewhere and lay them flat. I have done this before with rags I have used with oil based finish. I have never used straight linseed oil before and have heard that it is more prone to combustion than any other oil. Thanks again!

FWIW:  I still hang mine over the garbage can to dry, but found this interesting..  I suspect the real issue / concern is the amount of rags bunched up.  A small amount probably wouldn't do anything, however a couple dozen might.  I kind of look at this like coal piles; small piles aren't able to generate enough heat to be a concern, however once they get too tall and the weight is able to hold and generate heat that's when things get dicey..  I don't think it's as straight forward as oil + rag = fire..

 

Still, always better to Err on the side of caution. 

 

  • Author

Thanks for the video. One rag laying flat, drying out is probably not much of a hazard. Like Carus said, if laying flat was an issue, we would occasionally have our projects ignite. I am just a little overly cautious when it comes to this stuff. 

 

BLO has been applied and rags are now drying on a cinder block in the middle of my yard on a overcast 55 degree day. I think I will be fine. Thanks everyone!

There’s a small English Gothic country church in our town. If you watch BBC shows like Midsomer Murders, the PD James/Adam Dalgliesh Mysteries, etc then you’ll see lots of these old field-stone country churches… http://www.hba-llc.com/prj_religious_stbernardsepiscopal.html

 

About 15 years ago, a comprehensive historic preservation plan was developed for the building and was in the process of execution when a fire gutted the structure… The details of who did what are rather sketchy (probably for insurance reasons)… Current iteration of the story: A group of volunteers was working under the direction of a contractor specializing in historic preservation… They were refinishing the original 150 year old pews with an oil/varnish blend... Somehow the messaging on oily rags got lost (or had not been delivered) and a bin-bag full ignited…

 

All that's officially known for sure is that a bin-bag of oily rags ignited and gutted the structure --- the explination of how it got that way has been, shall we say, more fluid...

 

Took several years and about $7M to restore the church…

 

Beware oily rags…

 

For the OP: I just lay the rags over our deck railing until they dry -- usually overnight. Then toss them.

These rags are VERY dangerous and they will ignite. Also paste filler rags or anything with japan drier in it as well.

 

If this is something you do regularly get a Just Rite safety can. Allow the rags to dry in there and then dispose of them. Better still I really don't see the attraction to BLO in the first place. It dries too slowly and continues to darken and yellow over time, there are many better methods to do a nice finish without burning your house down.

Reading the commentary over on YouTube, I can really see this happening... Really quite sobering... How many times have I spilled something in the shop, quickly entered 'emergency spill containment' mode and just tossed the paper towels without thinking? Once a year, once a month, who knows... I'm positive I've done something exactly like this with schellac, lacquer, dyes, stains, etc. I suspect I've never done it with oil for the simple reason that I don't use oil finishes all that often... BTW, I've got that exact same Just Rite safety can. Yea, they're expensive for what they are... But look at the downside... Highly recomended.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.