Recommended Posts

Posted

I am doing more and more hand work.  I decided it was time to make something that required a lot of accuracy.  I needed (wanted) a couple of try squares.  I started with a piece of walnut that I rescued from the firewood pile and I have a really neat thin piece of maple that a guy gave me that was supposed to be for a guitar fret board.  A bit of a challenge in that the blade stock had a radius in the face and it was a bear to flatten.  Very dry and very hard wood.  It was also thinner than my thinnest chisel.  I messed up the bridle joint a bit on the larger one that I made first, so I added a decorative overlay of ash.  The smaller one I did better on.  Everything was done with hand tools.  The finish is just a few coats of super blonde shellac padded on quickly.  Both the top and bottom of the blades register true with the "flip test".  The large one has about a 9" blade and the small one is 4".

 

Picture007_zpsf758c280.jpg

 

Picture008_zpsdd04ad5b.jpg

 

Picture009_zps9dc6ecac.jpg

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 57 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined