Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How many of you like to Scroll down memory lane?

Featured Replies

Hey, I'm thinking of buying a scroll saw.
I've been a woodworker of some kind or another for like 27 years now. But, I've never used a scroll saw.
Recently, I've wanted to do a project or two that would require some intarsia.

 

Ergo, I'm considering a scroll saw.

 

I can buy a scroll saw for 70 bucks. I can pay $1000.00

I can get one at just about every price point in between. (This is where Particle Board chimes in and tells me not to buy a scroll saw but get an 20,000 pound industrial laser cutting press instead.)

 

Anyhow, there must be some of you out there who do intarsia. I'm guessing the lion's share of you use a scroll saw.
What scroll saw do you have?
Are you happy with it?

 

Yes I have one made by some unknown company all cast iron and decent build quality. I bought it as part of a deal with other tools (lathe, HCM and some other small things) all for £30 which is about $47 US a few years back. Bought a bunch of blades for it and was all setup ready to go. Used it about 3 times - was disappointed every time. Now just use the bandsaw, coping saw or jewellers saw.

If you do buy one get one with variable speed control as the one I have is all or nothing.

Hey, I'm thinking of buying a scroll saw.

I've been a woodworker of some kind or another for like 27 years now. But, I've never used a scroll saw.

Recently, I've wanted to do a project or two that would require some intarsia.

 

Ergo, I'm considering a scroll saw.

 

I can buy a scroll saw for 70 bucks. I can pay $1000.00

I can get one at just about every price point in between. (This is where Particle Board chimes in and tells me not to buy a scroll saw but get an 20,000 pound industrial laser cutting press instead.)

 

Anyhow, there must be some of you out there who do intarsia. I'm guessing the lion's share of you use a scroll saw.

What scroll saw do you have?

Are you happy with it?

 

 

Actually bud I bought my grandson a little dewalt and its just fine. Its no Hegner but it works. Unless you start getting deep into scroll saw work a Lowes special is fine. This may be more your speed. :)

 

Restored-2-full-view1.jpg

  • Author

I know PB, I'm just messing with you.

I suppose I could just use my coping saw or get a fret saw, or drop a small blade on my band saw.

 

But a scroll saw looks so easy and relaxing to use. Kind like a sewing machine.

The DeWalt is an excellent scroll saw. http://www.woodcraft.com/Product/127233/DeWALT-Scroll-Saw-Model-DW788.aspxThey commonly go on sale for $500 including the stand and light. I found mine on Craigslist for half that, practically new but it took me over a year of looking.

 

I first bought a cheapo one from Menards, Performax for about $90. That was a waste of $90. Blades were impossibly difficult to change, not a good tool. I ended up giving it to Goodwill when I bought the Dewalt which I love.

The DW788 DeWalt that Cindy provided a link to is a design copy of the Excalibur (general tool co.) which is regarded by most as one of the best. I own the DW788 and can attest it's a good saw for the money.

Anyone familiar with Delta's machine?

 

Im a believer in the HD and Lowes try out program. If you want to save $$ on the Delta I'd just go buy it. If it sucks or doesn't meet your needs take it back.

http://www.finewoodworking.com/tool-guide/product-finder/delta-scroll-saw-40-680.aspx

I have the delta p-20 I like it but it's a bit of a pain to change the belt speed. The scroll saw is great for doing decorative additions to any project. Plus there great for doing all kinds of projects including bowls, boxes ect... Also I feel like it's a great tool for kids I have 3 in my classroom. When in doubt of what to do with a kid I plop them on the scroll saw and tell them to cut out there name. It's fairly safe, easy to use, kids can play with it and worst they can do is break the blade which cost next to nothing to replace. I would sugest that you figure out your own dust collection since no machines come with a quality set up. You can find everything from pvc pipe too downdraft false tops.

My first scroll saw was a Dremel saw which was nice and did want, however I did some scroll saw bowls and boxes and getting the blades through the stock proved to be difficult.

 

I purchased a like new Dewalt 788 on Craiglist which I've been really happy with, my only complaint is a lack of dust collection on it. If you're gonna scroll a lot you can make something to adapt to the bottom of the table that will allow you to hook up a shop vac to it. You'd be surprised how much dust a scroll saw makes. 

Timely thread! I signed out a book from the local library that has a scroll saw project I would like to do. Looking forward to the replies. All my preliminary research tells me that the dewalt is highly regarded in this category.

I would say the Dewalt is the best bang for the buck. Unless you live at your scroll saw, it'll probably be more than you'll ever need.

The Dewalt sounds like a good deal. I have a $125 Ryobi, virtually identical to the Central Machinery version at HF. It does a nice job, but the variable speed controller is starting to flake out. I think the key to scrolling is patience, especially with thicker material. It certainly cuts curves tighter than even a 1/8" bandsaw blade can manage.

I just picked up that Dewalt that Cindy and the rest mentioned - got lucky and found it used.  Tough design and quiet as a church mouse.  I've only used it for pattern making with 1/4 ply, and for hogging out dovetail waste, but thus far it's been great.  

 

Bigger footprint with the stand, though.  Actually surprised what a large tool it is for such intricate work.

 

Did I mention how quiet it is?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.