Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New domino and carve x owner.

Featured Replies

Two quick questions.

1. What is the most used domino size? And less used size?

2. Do regular jig saw blades fit in the festool jigsaw?

Congrats on the new toys!

 

My most used domino is the 8 x 40 - It really depends on what you're building tho.  If I was playing with a bunch of 8/4, my choice would be much different.

 

As for the blades, I've only ordered the FT ones so, don't have an honest answer for you.

I use 5 mm dominos with 5/8" and 3/4" boards & ply. 4mm with 1/2" thick stock and 8 or 10 mm with 8/4 stock. So it all really depends on what you build with.

  • Author

Thanks for the reply. I guess I'll pick up mor of the smaller domino's. Since 1/2 to 1 inch is what I mostly work in.

Thanks for the reply. I guess I'll pick up mor of the smaller domino's. Since 1/2 to 1 inch is what I mostly work in.

I bought th assortment, and have used a few of each size. You may want to look into the tenon assortment package.

It's really not very hard to make your own 'dominos' if you have the tools to mill wood. Making your own also lets you make wider mortises. There was neat video that Festool sent out earlier this year showing how to use the tick marks on the scale to quickly make larger (then the three standard) sized mortises.

I usually make all three widths whenever I make domino stock. Rip, drum sand to exact size then round over the corners on the router table ! You do have to have some pretty small radius roundover bits...... I have made them out of maghogany, oak , maple , cypress and poplar. It just takes some thin flat straight scraps and some careful accurate work.

I make mine about a MM under the width of the mortice to provide a glue relief channel and a bit of adjustment room.

You might as well make plenty, most of the work is in the set up time !

I will be doing my annual knife clean out sale at the end of Jan and have at least one maybe two sets of knives with all the profiles on a single knife for the smaller domino tool with sharpening templates. These are exact replica profiles taken from dominos. I will give them away to someone from here. otherwise they will go in the lot sale.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.