rodger. Posted January 1, 2015 Report Posted January 1, 2015 Has anyone tried this tool? Seems kinda cool and could save some time when prepping a card scraper. Or is it just a gimmick tool?http://www.leevalley.com/en/wood/page.aspx?p=32633&cat=1,310,41070 Quote
wdwerker Posted January 1, 2015 Report Posted January 1, 2015 The original version was made with a wooden body and cost about $50 . It worked great but I noticed it missing after a guy suddenly quit and I never replaced it. Glad you brought it up ! Gonna get me a new one! Quote
rodger. Posted January 1, 2015 Author Report Posted January 1, 2015 The original version was made with a wooden body and cost about $50 . It worked great but I noticed it missing after a guy suddenly quit and I never replaced it. Glad you brought it up ! Gonna get me a new one! What thickness of card scrapers do you use for general work steve? Quote
wdwerker Posted January 1, 2015 Report Posted January 1, 2015 I have no idea, sandvick rectangular ones from Highland Woodworking. Quote
TerryMcK Posted January 1, 2015 Report Posted January 1, 2015 Looks very interesting and it IS a Veritas so probably well designed. Mine are about 1mm or 40 thou. Quote
rodger. Posted January 1, 2015 Author Report Posted January 1, 2015 I have one and they work well. So the user still needs the joint and polish the scraper as per normal, and the veritas takes care of "thinning the edge" and turning the hook? Is this correct? Quote
wdwerker Posted January 1, 2015 Report Posted January 1, 2015 It lets you apply pressure without the scraper flexing away from you or the angle getting off. Nice consistent hook. Quote
Tom Cancelleri Posted January 2, 2015 Report Posted January 2, 2015 Interesting. No need to draw out the burr before turning the hook. Looks almost too easy. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.