Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Festool sale.

Featured Replies

  • Popular Post

I think the number of threads started on this Kapex sale will substantially outpace the number of orders placed.

If your in the market for a K-pax

 

They could be giving it away for free...I'm not gonna sit through that crap again.

 

 

51DLu3MenBL._SX940_.jpg

They could be giving it away for free...I'm not gonna sit through that crap again.

 

 

51DLu3MenBL._SX940_.jpg

 

 

Now that's funny! I had to watch this movie on the way back from Korea! No thanks!!

I have yet to find a good use for a miter saw in woodworking. Nothing beats table saw crosscut and miter sleds in accuracy and width capacity. Now if you're dealing with 12' long boards all day that's a different story. 

I have yet to find a good use for a miter saw in woodworking. Nothing beats table saw crosscut and miter sleds in accuracy and width capacity. Now if you're dealing with 12' long boards all day that's a different story. 

 

I'm kind of the polar opposite.  Neither is wrong, just different ways to get the job done.  Many would argue that the TS is more accurate, they might be right even with the Festool gear.

I have yet to find a good use for a miter saw in woodworking. Nothing beats table saw crosscut and miter sleds in accuracy and width capacity. Now if you're dealing with 12' long boards all day that's a different story. 

 

For my workflow right now a "KPAX" or any SCMS would be a luxury. I do all my cross cuts on my table saw as well Mike. I think honestly it might even be more cost effective and functional to get an MFT3 setup with the track saw for these cuts. 

The thing with woodworking is there are multiple ways to get a job done. Since most of us are hobbyists, the right way is whatever makes you happy. Whether it be cutting M&T's by hand or cranking them out with Domino's, enjoying time in the shop away from the daily grind is what matters the most. Heck, I made just as good furniture with my Jet contractor's saw as I did with my Steel City cabinet saw, and I know my shiny black cabinet saw isn't going to make me a better woodworker.

 

Which reminds me - anyone in the market for a nice Steel City cabinet saw with a lot of accessories :)

Since I only have a tiny table saw, I sometimes wish I had a miter saw for rough cutting to length.  I currently do it with a circular saw which takes me forever because I'm fairly paranoid.   I'd probably be willing to fidget with a miter saw to get good 90s and then just use it.   But then at some point I'll get a real table saw and then I'd be in the "why have a miter saw" group.

 

 

Which reminds me - anyone in the market for a nice Steel City cabinet saw with a lot of accessories :)

 

7 hours each way is too far. =p

Almost all the rough lumber I get is 8 ft and up... It's way easier to throw a board like that on the miter saw than to wrestle it up on the table saw and slide it back and forth for me. I just upgraded my miter saw so maybe I've just got new tool fever, but the thing will make a perfect 90.

I think the number of threads started on this Kapex sale will substantially outpace the number of orders placed.

Definitely!  I do want to get one someday, but it is not high enough on the list just yet.  My next Festool is a Domino.  However, my wife and I celebrated our 40th last May, and have planned a trip to Europe for April.  And then our youngest daughter set wedding palns for July.  Probably no room in the budget this year for Festool purchases.  I'll be lucky to just buy a few [ieces of wood this year for anything shop-related.

 

Regarding miter saws, I have one already, but would love to have the Kapex.  As blakjak220 said, they are much easier to use than using a table saw for long boards. And I also own a very old radial arm saw.  (I only use it for crosscutting, and no longer use it for miters).   I built a bookcase with dadoes on the six foot long ends for shelves.  Was a simple procedure on the radial arm saw with dado blade installed, would have been really difficult to balance on the table saw, and impossible to do on a miter saw.

Almost all the rough lumber I get is 8 ft and up... It's way easier to throw a board like that on the miter saw than to wrestle it up on the table saw and slide it back and forth for me. I just upgraded my miter saw so maybe I've just got new tool fever, but the thing will make a perfect 90.[/quote

My process with 12 foot stock I get from my supplier is to chalk out my piece parts then break down the rough parts with a jig saw before taking to the table saw for final dimensions. If I had a cross cut station, I would definitely use that. IMHO, for those with limited space or budget, a CMS or radial arm would be low on the priority list.

 

Agreed.... a CMS can take up a lot of space. I actually just have mine sitting in a corner and set it up on my bench when I'm ready to use it. Not ideal, but like you said, you work with what you have when space and money are limiting factors. I think the most convenient thing for me about the miter saw is obviously the dependable ability to get accurate angle cuts but also I use it for my finish cut. Which seems like it wastes a little less wood since you're only cutting once and done instead of cutting with a jig saw then cutting again with the table saw. But like you said, it really is an easier tool to replace with something smaller (jig saw) than it would be to replace the table saw, band saw, drill press, etc...

It's nice, just not a mandatory must have item at the moment. There's a million ways to get the job done. I'll get one at some point.

I used one in a class at Woodcraft and I'll take my much cheaper Dewalt. I have some FT but honestly the miter saw to me isn't worth the price. Even in sale

I built a new top for my radial arm saw about 10 years ago.  It is 48" wide, and 24" deep.  With dust shroud and dust collection elbow behind it, it sticks out from the wall 42"!  And I have a basement shop, so it takes up so much space.  But it can crosscut almost 17", so it really has been a great tool to have.  And since I've been using it since 1976, I feel reasonably comfortable with it.  :)   It is my go-to saw for so much work.

 

I got a table saw about 10 years ago, but I really only use it for ripping.  I want to build a sled for the table saw, and with that and my Festool track saw on my 84" long custom MFT-style workbench, I really could free up some space by using these two newer solutions (sled and track saw) for all of my crosscutting. 

 

I'd probably just move the RAS to the garage, and use it for breaking down long boards before hauling down to the basement shop.  I just cannot imagine ever getting rid of it.  But I can envision freeing up a huge amount of real estate that it takes up in the shop!

timbermagic, do you use it for dadoes?    Everytime I'm watching old New Yankee Workshop, Norm is always making RAS look like an amazing tool. =p   Seems a lot easier to cut several dadoes across a long board on the RAS than on the TS.

Vyrolan,

 

Yes, I have used it for dadoes.  My kids wanted a built-in bookcase for DVDs in an unused closet, so I made a 6 foot tall cabinet with quite a few fixed shelves.  It was so easy to cut the multiple dadoes.  And since the sides were made from 1X8s, I had room to cut both of the ends at the same time so the dadoes were perfectly aligned.

 

A table saw would have been really cumbersome, and a router table just as bad.  The only other choice would have been hand routing them using the router and a guide.  Lots of clamping and re-clamping. 

 

Since I "grew up" with my RAS, I found it to be such a versatile saw that I did not buy a table saw until about 10 years ago (justified it to have a dedicated saw and blade for ripping, rather than making all the setup changes needed to go from crosscutting to ripping, and back, with a RAS).

 

Years ago I had to make some beveled miter cuts.  That is also a relatively easy task on a RAS.  I've even rotated the head and made coping cuts.

 

I didn't know Norm was a RAS fan.  I've gotta go find reruns of the show, or invest in a DVD set (I am assuming they are available).

That's awesome. I have to do those by hand with guides. Lots of clamping indeed. You would be done in a fraction of the time. =p. For plywood I try to route them before ripping to get that same "do both sides simultaneously". Good ole RAS gets a bad rap. =p

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.