Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Curly Maple and Goncalo Alves, High Gloss Finish

Featured Replies

This is my first post and it's a pleasure to be here.  Ok, I got my hands on some very nice curly maple.  I bought what I thought was cocobolo over the phone.  Once I got there, it turns out it is Goncalo Alves aka Zebrawood/Tigerwood.  It's beautiful stuff I'll say that.  I am making a humidor with those two woods and a bit of Spanish Cedar of course.  I'm wanting to end up with a high gloss finish like the video and plan on rubbing it out, etc.  Since it is curly maple, I want to pop the grain as in the pencil holder video.  Here in lies my dilemma.  I don't want to use a wood putty to fill the pores, I think it would prevent me from getting the dye in the grain of the maple and "popping it".  Also, no stores within 2 hours one way carry Timbermate dye, or any shellac/lacquer tinting dyes.  I tried some Minwax Oil based stain mixed with a little de-waxed Bulls Eye shellac on some test pieces last night and will see how they sand out this evening.  Bottom line is I want to pop the grain and rub out a high gloss finish without using the colored pore filling putty.  I think any pore filler should be clear to get to where I want it to be.  I'm still relatively new to wood working so I'm sorry if this is an amateur question.  Thank for your help in advance, I hope I can return the favor.

 

J.T.

Curly maple really doesn't need the pores to be filled.  I also would not use a dye to bring out the figure in curly maple.   I have recently been convinced here that BLO is the absolute best way to bring out figure in maple, and I already loved it.  I tried the sand back method that Ryan recommended in post 13-14 in that thread on some handles I turned made from some scrap curly maple, and they are stunning, absurdly so considering they are file handles.

Goncalo Alves is often referred to as tigerwood or Brazilian koa.  Zebrawood is something entirely different.

Repeated coats of clear finishes dry/cured and sand flat carefully before the next coat will fill any visible pores eventually. Be careful not to build a finish too thick, that can cause problems .

I'll go third on the BLO for maple ... dyes and stains are generally a bad idea since they don't always "take" evenly but BLO never seems to have that problem.

Goncalo Alves is often referred to as tigerwood or Brazilian koa.  Zebrawood is something entirely different.

Yes, it definitely is, but unfortunately the use of common names is often ridiculous and goncalo alves IS sometimes called zebrawood. I have NEVER seen any that would even remotely remind me of a zebra.

 

The several species that are sold under the common name goncalo alves have a combined total of well over 200 different common names

 

EDIT: now that I think about it, I mis-spoke. I HAVE seen goncalo alves that looked at bit like zebra stripes.   Still, I would never use zebrawood to describe goncalo alves

I made a picture frame out of goncolo alves about a month ago.  I wasn't looking for high gloss, but the finishing was pretty easy.  I just sanded to 220 and put on some satin arm-r-seal.  I'd think that you could possibly get what you are looking for with a gloss Arm-R-Seal and sanding to the higher grits.

 

pay no nevermind to the bit of tear out you can see in the pics 8-)

post-15981-0-00799800-1422831526_thumb.j

I made a picture frame out of goncolo alves about a month ago.  I wasn't looking for high gloss, but the finishing was pretty easy.  I just sanded to 220 and put on some satin arm-r-seal.  I'd think that you could possibly get what you are looking for with a gloss Arm-R-Seal and sanding to the higher grits.

 

pay no nevermind to the bit of tear out you can see in the pics 8-)

Looks like you've got the muiricatiara (Astronium graveolens) variety which is the only one of the goncalo alves species that ever has that bland uniform grain without the black streaking

My lumber dealer had a sale month on exotics, so the wife and I went and grabbed a few boards of various Types. Most of the goncolo in the pile had the dark streaks, we picked one board with and one without. There were still some streaks in the board the frame came out of, but n it nearly to the level of most boards in the stack.

I'd forget the Minwax stain.  Some of it is dye.  Some of it is stain. and I think even some of it has both.  Plenty of people do use dye, but I'd do a lot of experimenting before committing to the final product.  Charles Neil has some good info on it that works too.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.