Recommended Posts

Posted

im looking to see if there is a router bit that i can mount in my dremel so that i can make tiny cuts with a pattern.  if they dont make one is there a way to build my own can i just epoxy a tiny bearing to a dremel router bit so it turns?

Posted

What about using a guide bushing? Most likely you will need to work with an offset either way. I doubt you will find a bearing to exactly match the cutter diameter.

What sort of cutter are you using, by the way? I find that using a diamond bit in the dremel lasts longer, and doesn't burn like a spiral HSS cutter. Of course, since it is sort of grinding the surface, it isn't quite as smooth.

Posted

i tried diamond it does not cut as fast at least the higher grits needed for smoother cuts.  do they make guide bushing for dremel? i have this base and would like to have a pattern bit that i can use to cut out images.  sick of making one image cut it out thought to make templates that i would save.  somone was recently asking about sighns and i thought it would be nice to have some alphabet patterns for making some iteams. 

 

 http://www.stewmac.com/Luthier_Tools/Tools_by_Job/Inlay_and_Pearl_Cutting/Precision_Router_Base/Precision_Router_Base_Complete_Set.html 

Posted

I have one of those bases from Stew-Mac as well. I don't know if there is any way to use a guide bushing with it.

I don't have the edge guide shown in your link, do you? The bearing side of it could be used as a pattern follower for some applications, but probably not letters. A pantograph might be better for that.

Posted

I have one of those bases from Stew-Mac as well. I don't know if there is any way to use a guide bushing with it.

I don't have the edge guide shown in your link, do you? The bearing side of it could be used as a pattern follower for some applications, but probably not letters. A pantograph might be better for that.

No I don't realy only usable for edge work.

Posted

pat that was exactly what i needed i think  ill just make an entire base to replace mine that i can swap on and off.  actually was thinking of making a series of different bases that will do different things like one for doing trim inlay along the edge, one for cuting square lines, one for cuting patterns  

 

make several like this one then i just screw over my dremel

http://handmademusicclubhouse.com/photo/minirouter1r-1?commentId=4519676%3AComment%3A82277&xg_source=activity

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 43 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined