Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New to the FesCult

Featured Replies

Just picked up my first Festool. I grabbed an OF 1400 router and just started playing with it.

DAMN!

The impetus was trying to plunge some mortises with my Rigid 2hp router. They're famous for having sticky plunge bases (read: you push down and it doesn't move, so you push harder and it SLAMS into the workpiece) and the mortise and guide collar kept getting filled with shavings. Needless to say, the Rigid is going to be relegated to a router table built NYW style. It should do fine in there with a Jess-em lift, I think.

Im just McGuivering together a coupler to attach the DC to my shop vac, but I know eventually I'll get an extractor. I just couldn't bring myself to blow that much in one sitting...

Next is probably a domino... If anyone in the vancouver area wants to do a "domino share" program, hit me up!

Domino is a game changing tool. I ran my ETS150/3 sander and my Domino on a Fein Hepa vac for several years . Adapting the hose was the only tricky part. Adding holes to reduce/control the suction is needed for sanders. Full suction for the Domino and routers.

  • Author

I'm lucky in that my normal day job (RV conversion, I own the business) affords me a large air compressor and the associated air sanders. As nice as I'm sure the Festool sanders are, I just cannot fathom sanding with such a tall sander after years of using the nice svette air sanders. Every electric sander has to have a motor, and thus your hand is farther away from the workpiece. Farther away = less control. The air sanders don't numb your hands as much. Can't say they're cheaper though, as my Dynabrade was around 450$

I'm lucky in that my normal day job (RV conversion, I own the business) affords me a large air compressor and the associated air sanders. As nice as I'm sure the Festool sanders are, I just cannot fathom sanding with such a tall sander after years of using the nice svette air sanders. Every electric sander has to have a motor, and thus your hand is farther away from the workpiece. Farther away = less control. The air sanders don't numb your hands as much. Can't say they're cheaper though, as my Dynabrade was around 450$

 

Festool makes air sanders as well, except you need to buy the pieces to allow you to plug it into the CT vacuum system for dust collection. The air and vacuum go through the same hose. 

I'm lucky in that my normal day job (RV conversion, I own the business) affords me a large air compressor and the associated air sanders. As nice as I'm sure the Festool sanders are, I just cannot fathom sanding with such a tall sander after years of using the nice svette air sanders. Every electric sander has to have a motor, and thus your hand is farther away from the workpiece. Farther away = less control. The air sanders don't numb your hands as much. Can't say they're cheaper though, as my Dynabrade was around 450$

 

That's what I particularly enjoy about the ETS 150 models, I control them by the handle and not on the motor itself.

That's what I particularly enjoy about the ETS 150 models, I control them by the handle and not on the motor itself.

Yes! And a two hand grip for a large surface gives much less sand in the hands feeling.
  • Author

Even the Festool air sanders are taller than an equivalent Dynabrade... You really have to use one to understand how the slightest difference in distance from hand to pad makes the tool feel entirely different. I just measured my favourite and it's 3" from the sanding surface to the very top of the sander. I think the Festool's are over 5". Just a taller triangle to move around, and more likely to tip.

Even the Festool air sanders are taller than an equivalent Dynabrade... You really have to use one to understand how the slightest difference in distance from hand to pad makes the tool feel entirely different. I just measured my favourite and it's 3" from the sanding surface to the very top of the sander. I think the Festool's are over 5". Just a taller triangle to move around, and more likely to tip.

 

I think if most people had access to large quantities of air there is no way festool could compete with air sanders. Dynabrades are much less expensive and will outperform and outlast electric sanders any day of the week. If you have the air source to power them properly they are a different game altogether. That said very few can actually run them and run them properly.

  • Author

I think if most people had access to large quantities of air there is no way festool could compete with air sanders. Dynabrades are much less expensive and will outperform and outlast electric sanders any day of the week. If you have the air source to power them properly they are a different game altogether. That said very few can actually run them and run them properly.

Yup!

 

Festool does have the dust extraction angle down pat, though. The area where most air sanders are probably used, auto refinishing, is generally less concerned with dust, since a lot of processes need to be done by hand anyways. They just make sure to have a dust zone for bodywork and a clean zone for spraying.

 

I always thought someone should make a sander where the motor is even higher, and the ergonomics would be designed such that your hand held the sander under the motor. The motor could be as bulbous as necessary, but since your hand is under it it wouldnt matter. I tried holding a rotex this way, but it wasnt quite there...

In the meantime, suck it up and buy the $79 festool hose (pardon the pun). You'll forget about the purchase and your life will get 32% easier

In the meantime, suck it up and buy the $79 festool hose (pardon the pun). You'll forget about the purchase and your life will get 32% easier

 

So I only need $249.88 to make my life 100% easier.  Sounds like a good deal to me.

  • Author

In the meantime, suck it up and buy the $79 festool hose (pardon the pun). You'll forget about the purchase and your life will get 32% easier

 

I've been trying to find the right hose online, (a festool part #) but haven't had any luck. Basically they have a hose that connects to the 1400 and to a standard 2" shop vac port. The "festool guy" wasnt in at Lee Valley when I picked up the router, so the rest weren't much help.

 

If you have a part #, or a link, I'd appreciate it :D

  • Author

Found the cheapest festool non anti-static hose at lee valley that will work....126$ or so. Fits right in to the rigid vac.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.