joe mendel Posted May 4, 2015 Report Posted May 4, 2015 Sorry about the glitch. Here is the photo of the mirror. Quote
Brendon_t Posted May 5, 2015 Report Posted May 5, 2015 Joe, what did you use to cut the outside detail? What did you use to sand the edges of the curves? Quote
Janello Posted May 5, 2015 Report Posted May 5, 2015 Awesome flame in that piece. The top reminds me of the heat misers hairdo! Quote
wtnhighlander Posted May 5, 2015 Report Posted May 5, 2015 Awesome figure!And the wood is nice, too! 1 Quote
joe mendel Posted May 5, 2015 Author Report Posted May 5, 2015 Joe, what did you use to cut the outside detail? What did you use to sand the edges of the curves? I cut the crests and lobes on my scroll saw. There was very little saw kerf and zero burn-good feed rate and proper toothed blade made it easy. What straying off my line that I may have encountered was corrected with Grobert files and a card scraper finished off the edges. No sand paper was used. I try to only use sandpaper and other abrasives on spindle turnings and during the finishing process on projects. I tend to old school it with planes and scrapers. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.